Loading ...
Loading ...
Loading ...
Initial setup
Welcome to use the Wizard for Initial Setup !!
Please press [OK] to start the wizard.
Welcome
General Operation
Initial set-up involves selecting all the settings required to
be able to search for and store all the channels you can
receive. Make sure that the television is switched on and
follow all the steps in turn specified hereafter.
The first time you switch the set on, the Initial setup
wizard opens, which guides you through the initial setup
process. Press OK to start your initial setup.
1. Press the up or down direction button to select
your language, then press the OK or right direction
button to enter the next step.
2. Press the up or down direction button to select Scan
and press the OK or right direction button to start the
search automatically. All available TV programmes
are stored. This operation takes a few minutes.
The display shows the progress of the search and the
number of programs found.
Note: to prevent the channel setup process from being
interrupted, wait for the message indicating that the
setup is complete.
In this step, you can also select Skip Scan to skip the
channel search progress. But when you turn the TV on
next time, the prompt on the screen will remind you to
do the channel scan first.
3. During the setup, user can follow the hints available at
the bottom of the screen to return to the last step by
pressing the left direction button. Or press Exit to exit
or interrupt the search halfway.
4. Once the automatic search ends, the set enters the
next step automatically. You can press the up or down
direction button to select your location Shop or Home.
Press the OK or right direction button to confirm your
selection and enter the last step.
Note: the Shop mode does not satisfy the MEPS
certification, suggest selecting Home.
5. - In this step, you can press OK to exit the initial setup.
The channels are arranged in a preset order. If you
wish to skip channels, modify the preset order or
rename channels, select Setup > Organiser for these
operations.
- In this step, you can also press the left direction
button to return to the previous step.
Initial Set-up
To access the menu system:
1. Press the Menu button to display the main menu.
2. Press the up/down/left/right direction buttons to select
the desired item, then press the OK button to open the
corresponding submenu.
3. In submenus, use the up or down direction button to
select menu options, use the left or right direction button
to set functions or change values. Use the OK button
to activate a setting. Use the OK or right direction button
to open the corresponding submenu.
4. Press Menu to return to the previous menu or press
Exit to close the menu.
Using Menu System
This section explores the menus of your TV. Each menu
is outlined and detailed to help you get the most from
your TV.
Language Selection
Press the up/down/left/right direction buttons to select
Setup; then press OK to display its options:
1. Select Setup > Language. Press the OK or right
direction button to display its submenus:
Menu language: Press the left or right direction
button to select the preferred language for all menus.
Preferred audio language: press the left or right
direction button to select the preferred audio language.
Preferred audio language 2nd: press the left or right
direction button to select the preferred audio language.
8
Picture
Sound
PAP
Options
USB
Timer
Lock
Setup
Back
Exit
Select
Enter
Menu
Exit
OK
Setup
Language
Channel install
Organizer
Input settings
Diagnostic
Time shift
Reset shop
Off
Loading ...
Loading ...
Loading ...