Loading ...
Loading ...
Loading ...
26
Operating
Instructions
Safety InstructionsCare and Cleaning
Installation
Instructions
Troubleshooting Tips
Customer Service
Read these instructions completely and carefully.
Anti-Tip Bracket
This range is equipped with an anti-tip bracket
attached to the back of the range with two screws. If
countertop thickness is greater than 1/2, relocate
anti-tip bracket to the lower position 1/4below.
Slide range into position. Make sure the anti-tip
bracket is secured under the rear countertop.
WARNING
Range must be secured by anti-tip bracket
supplied.
Unless properly installed, the range could be
tipped by stepping or sitting on the door. Injury
might result from spilled hot liquids or from the
range itself.
ANTI-TIP BRACKET
AT REAR OF RANGE
Installation Instructions.
Install the Range Retention “L” Brace (optional)
1. Once the range is securely in position in the
cabinet opening, position the “L” brace
against the side of the cabinet and flush with
the front of the range leg.
2. Hold the “L” brace in place and mark the two
holes on the inside of the cabinet.
3. Drill two 1/8 pilot holes into the cabinet
where you just marked. (Caution should be used
to avoid drilling through the opposite side of the
cabinet.)
4. Attach the “L” brace to the cabinet with the
screws provided.
5. Repeat the procedure on the opposite side.
When installing this range onto some smooth countertops, it may be necessary to install the
Range Retention “L” Braces provided, to prevent movement of the range.
Range Leg
“L” Brace
Loading ...
Loading ...
Loading ...