Loading ...
Loading ...
Loading ...
Using the self-cleaning oven.
Before a Clean Cycle
The range must be completely cool in order to set
the self-clean cycle.
We recommend venting with an open
window or using a ventilation fan or hood
during the first self-clean cycle.
Remove all cookware and any aluminum
foil from the oven.
The oven shelves can be self-cleaned, but
they will darken, lose their luster and
become hard to slide.
Do not use abrasives or oven cleaners. Clean
the top, sides and outside of the oven door
with soap and water.
The enamel grid and broiler pan may be
cleaned in the self-cleaning oven. However,
to help prevent heavy smoke caused by self-
cleaning the greasy soil in the pan, you must
first clean off the excess grease.
Make sure the oven light bulb cover is in
place and the oven light is off.
IMPORTANT:
The health of some birds is
extremely sensitive to the fumes given off
during the self-cleaning cycle of any range.
Move birds to another well-ventilated room.
Wipe up heavy soil on the oven bottom.
How to Set the Oven for Cleaning
Press the
SELF CLEAN
pad.
Press the
INCREASE
or
DECREASE
pad
until the desired clean time is
displayed
.
Clean cycle time is normally 3 hours.
You can change the clean time to between
2 hours and 4 hours, depending on how
dirty your oven is. The door will lock and
the self-clean cycle will automatically begin
after “CLEAN” is displayed and the time for
the clean cycle is set. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the
LOCKED
light goes off.
To Stop a Clean Cycle
Press the
CLEAR/OFF
pad.
When the
LOCKED
light goes off and the
oven has cooled below the locking
temperature, you can open the door.
or
SELF
CLEAN
How to Delay the Start of Cleaning
You can set the oven control to delay start the oven,
self-clean for a specific length of time and then turn
off automatically.
Make sure the clock shows the correct time
of day.
Press the
SELF CLEAN
pad.
Using the
INCREASE
or
DECREASE
pad,
enter the desired clean time.
Press the
STOP TIME
pad. The earliest
stop time you can set will appear in the
display.
Using the
INCREASE
or
DECREASE
pad,
enter the time of day you want the
clean cycle to stop.
The oven control will automatically subtract
the amount of cleaning time from the stop
time to determine when cleaning will begin.
The door locks automatically. It will not
be possible to open the oven door until
the temperature drops below the lock
temperature and the
LOCKED DOOR
light
goes off.
When the
LOCKED DOOR
light is off, open
the door.
or
SELF
CLEAN
or
STOP
TIME
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a soap-
filled steel-wool pad and rinse thoroughly with a
vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
■ You cannot set the oven for cooking until
the oven is cool enough for the door to
unlock.
■ While the oven is self-cleaning, you
can touch the
CLOCK
pad to display
the time of day. To return to the clean
countdown, press the
COOKING TIME
pad.
■ If the shelves become hard to slide,
apply a small amount of vegetable oil or
cooking oil to a paper towel and wipe
the edges of the oven shelves with the
paper towel.
After a Clean Cycle
16
Operating
Instructions
Safety InstructionsCare and Cleaning
Installation
Instructions
Troubleshooting Tips
Customer Service
Loading ...
Loading ...
Loading ...