Loading ...
Loading ...
Loading ...
23
Power on/off
►Be careful not to pinch your nger with the lens door, to
prevent an injury.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
►Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
WARNING
1.
Press the STANDBY/ON button on the projector or the remote control.
The message “Power off?” will appear on the screen for about 5 seconds.
Turning off the power
2.
Conrm that there is nothing that the lens door
hits while closing.
Press the STANDBY/ON button again while the
message appears.
If the pen sensor is within easy reach, attach
the sensor cover provided to keep it from
getting dusty.
The projector lamp will go off, and the POWER indicator will begin blinking in
orange. The lens door will close right after the lamp goes off.
However, to maintain better picture quality, the lens door will close after the
lamp has been cooled down when the projector is installed upside down such
as in ceiling mount installation. Then POWER indicator will stop blinking and
light in steady orange when the lamp cooling is complete (128).
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
•
This projector has the function that can make the projector automatically turn
on/off. Please refer to the DIRECT POWER ON
(61)
and AUTO POWER OFF
(62)
items of the OPTION menu.
NOTE
Loading ...
Loading ...
Loading ...