Loading ...
Loading ...
Loading ...
6
OPERATING INSTRUCTIONS
LIGHTING INSTRUCTIONS
Open the control box lid, depress and hold down
the ‘ON/IGNITION/LOW’ button. This button
operates the sparker, which in turn ignites the pilot
flame and the low setting burner. It is necessary to
hold down the ‘ON/IGNITION/LOW’ button firmly
for at least 20 seconds to allow the gas valve to
‘lock in’. If the burner fails to light, repeat the
ignition sequence described above.
The ON/IGNITION/LOW button and the MEDIUM/HIGH button each have two operating
positions, which provides three heat settings.
?
IGNITION
Hold down ‘ON’ button
SWITCH OFF
Depress Momentarily
LOW HEAT SETTING
MEDIUM HEAT SETTING
HIGH HEAT SETTING
BRIGADIER - 3 TILES LANCER - 2 TILES
BRIGADIER - 5 TILES LANCER - NOT APPLICABLE
BRIGADIER - 7 TILES LANCER - 4 TILES
Low, medium and high settings can be obtained by setting the buttons set as shown in the diagrams
above. If you depress the button firmly and it remains in the half way position, a second depression
will return it to the fully up position.
Please Note:
Discolouring of the heater tile face is a natural effect of the gas combustion process.
Fan Switch
On/Ignition
Off
Loading ...
Loading ...
Loading ...