Loading ...
Loading ...
Loading ...
5-44
Driving your vehicle
Operating conditions
To operate:
Cluster type A
Go to the 'User Settings → Driver
assistance → Rear Collision
Warning and select RCCW (Rear
Cross-Traffic Collision Warning)' on
the LCD display.
Cluster type B
Go to the 'User Settings → Driver
assistance and select RCCW (Rear
Cross-Traffic Collision Warning)' on
the LCD display.
The system will turn on and standby
to activate. The system will activate
when vehicle speed is below 6.2
mph (10 km/h) and with the shift
lever in R (Reverse).
If the function is deselected from the
instrument cluster, the function will
deactivate.
For more information, refer to
"LCD Display Modes" in chapter 3.
Information
• The last selected setting (ON or
OFF) of the RCCW is remained in
the system.
• The system will activate when vehi-
cle speed is below 6.2 mph (10 km/h)
and with the shift lever in R
(Reverse).
• The Rear Cross-Traffic Collision
Warning (RCCW) detecting range
is approximately 0.5 m ~ 20 m (1 ft ~
65 ft) in the direction of both lateral
sides of the vehicle.
An approaching vehicle will be
detected if their vehicle speed is
within 2.5 ~ 22.5 mph (4 km/h ~36
km/h).
Note that the detecting range may
vary under certain conditions. As
always, use caution and pay close
attention to your surroundings
when backing up your vehicle.
Warning type
If the vehicle detected by the sensors
approaches your vehicle, the warn-
ing chime will sound, the warning
light on the outside rearview mirror
will blink and a message will appear
on the LCD display.
i
• Type A
â– Left
â– Right
• Type B
• Type A
• Type B
OAE058220/OAE058046
OAE058221/OAE058047
Loading ...
Loading ...
Loading ...