Loading ...
Loading ...
Loading ...
BEFORE YOU CALL FOR SERVICE
To clean the filter:
1 Open the dryer door.
2 Remove the lint filter by pulling it up and out of the filter slot.
3 Open it out and wipe the surface clean with your hand.
4 Close the lint filter and place it back in the opening. Ensure the filter is fitted
correctly back in place before operating the dryer.
IMPORTANT!
If the lint filter becomes damaged, contact your Haier Repairer to arrange for a
replacement filter. Do not operate your dryer with a damaged lint filter or
without the filter in place, as this will cause damage to your dryer.
Your dryer is capable of diagnosing a number of its own problems. It will sound a
continuous series of beeps and display a code when it has a problem that you can
correct yourself.
User warnings
PROBLEM DISPLAYED AS WHAT TO DO
The door is not
closed
Close the door fully and press ‘Start / Pause’.
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in the
drum and that protruding items are not stopping the door
from closing.
Dryer has been
paused
Press the ‘Start / Pause’ to resume the cycle.
Fault codes
When a continuous series of beeps is sounded, all the lights turn off on the control
panel and a number appears on the display, a fault has occurred. The fault code will
be displayed as followed by a number on the digital display. Record the fault
code and call your Haier Repairer to arrange service.
If a fault code is being displayed, you can still turn your dryer off by pressing ‘Power’
button.
17
Loading ...
Loading ...
Loading ...