Loading ...
Loading ...
Loading ...
www.BISSELL.com
9
Manual Cleanings Using Control Panel
Selecting a
Cleaning Time Control Panel Display What It Does
1st Press
Maximum run time - will return to the
docking station to recharge
2nd Press
30 minute run time - will return to the
docking station to charge
3rd Press
45 minute run time - will return to the
docking station to charge
4th Press
60 minute run time - will return to the
docking station to charge
5th Press
Sends robot back to the docking station
without cleaning
6th Press
30 minute run time - will not return to the
docking station
7th Press
45 minute run time - will not return to the
docking station
8th Press
60 minute run time - will not return to the
docking station
Selecting the
Cleaning Power Control Panel Display What It Does
1st Press Cleaning power is set to Normal
2nd Press Cleaning power is set to Turbo
Selecting the
Navigation Control Panel Display What It Does
1st Press
Spiral - Robot will work in circles until it
encounters an obstacle (once it encounters
an obstacle it will switch to AUTO mode)
2nd Press
Along the Wall - Robot will clean along
walls and edges
3rd Press
“Z” Formation - Robot will move up and
down the room following a zig-zag path
4th Press
Diagonal Path - Robot will move in diagonal
paths around the room, adjusting its
direction as obstacles are encountered
5th Press
Auto - Robot will cycle through all modes
(Spiral, Along the Wall, “Z” Formation, and
Diagonal Path)
Display on screen What It Does
Battery Low: Battery needs to be charged
(Power LED turns Red)
The trash can indicator shows the dust bin is full and needs to be
emptied
Loading ...
Loading ...
Loading ...