Loading ...
Loading ...
Loading ...
www.BISSELL.com
6
1
Initial Charging of the Battery: AC/DC Adaptor
Plug the adaptor plug into the port
directly next to the power switch first,
and then plug the other end in to the
wall outlet. Turn on the power switch
of the unit on. The initial charge will
take 4-5 hours.
For the initial charge, plug the wall
adaptor directly into the charging
port on the robot vacuum and
turn the power on.
NOTE: The unit will
not charge if the
power switch is OFF.
Install the edge cleaning
brushes and the battery
according to the assembly
instructions.
Leave the power switch
on and charge the battery
directly from power cord
for 4-5 hours prior to the
first operation.
Use the invisible wall
to keep the robot from
cleaning in areas where
obstructions have not
been removed.
Getting Ready to Clean
1 2 3
WARNING - DISPOSAL OF BATTERY
If your SmartClean robotic vacuum is to be disposed of, the battery should be removed and
disposed of properly. For speciļ¬c disposal instructions of the battery, please contact RBRC
(Rechargeable Battery Recycling Corporation) 1-800-822-8837 or visit www.rbrc.com
Loading ...
Loading ...
Loading ...