Loading ...
Loading ...
Loading ...
tire/wheel on a flat, solid and slip-resistant sur‐
face.◀
WARNING
The vehicle jack is only provided for
short-term lifting of the vehicle for wheel
changes. Even if all safety measures are ob‐
served, there is a risk of the raised vehicle fall‐
ing, if the vehicle jack tilts over. There is a risk
of injuries or danger to life. If the vehicle is
raised, do not lie under the vehicle and do not
start the engine.◀
WARNING
The vehicle jack is optimized for lifting
the vehicle and for the jacking points on the
vehicle only. There is a risk of injury. Do not lift
any other vehicle or cargo using the vehicle
jack.◀
WARNING
If the vehicle jack is not inserted into the
designated jacking point, damage to the vehi‐
cle may occur while cranking the vehicle up, or
the vehicle jack can slip away. There is a risk of
injury or risk of property damage. Make sure
that the vehicle jack is inserted into the jacking
point next to the wheel house while cranking
the vehicle up.◀
Securing the vehicle against rolling
General information
The vehicle manufacturer recommends to ad‐
ditionally secure the vehicle against rolling
away when changing a wheel.
On a level surface
Place chocks or other suitable objects, for ex‐
ample a rock, in front of and behind the wheel
that is diagonally opposite to the wheel that
you wish to change.
On slight down-hill grades
If a wheel needs to be changed on a slight
down-hill grade, place wheel chocks or other
suitable objects, e.g. a stone, under the wheels
of the front and rear axle.
Preparing the vehicle
▷ Change the wheel as far away as possible
from passing traffic.
▷ Park the vehicle on solid, non-slip and level
ground.
▷ Switch on the hazard warning system.
▷ Set the parking brake.
▷ Engage a gear or selector lever position P.
▷ As soon as permitted by the traffic flow,
have all vehicle occupants get out of the
vehicle and ensure that they remain out‐
Seite 177
Wheels and tires Mobility
177
Online Edition for Part no. 01 40 2 974 681 - VI/16
Loading ...
Loading ...
Loading ...