Loading ...
Loading ...
Loading ...
English 31
Technical data
Service
Before calling for assistance or service, please check the section “Troubleshooting”.
If you still need help, follow the instructions below.
Is it a technical fault?
If so, please contact your customer service centre.
Always prepare in advance for the discussion. This will ease the process of
diagnosing the problem and also make it easier to decide if a customer service
visit is necessary.
Please take note of the following information.
• What form does the problem take?
• Under what circumstances does the problem occur?
When calling, please know the model and serial number of your appliance. This
information is provided on the rating plate as follows:
• Model description
• S/N code (15 digits)
We recommend that you record the information here for easy reference.
• Model:
• Serial number:
When do you incur costs even during the warranty period?
• If you could have remedied the problem yourself by applying one of the
solutions provided in the section “Troubleshooting”.
• If the customer service technician has to make several service calls because he
was not provided with all of the relevant information before his visit and as a
result, for example, has to make additional trips for parts. Preparing for your
phone call as described above will save you the cost of these trips.
Technical data
Technical data
Appliance dimensions
Width 600 mm
Depth 520 mm
Height 56 mm
Worktop cut - out
dimensions
Width 560 mm
Depth 490 mm
Height 72 mm
Corner radius 3 mm
Connection voltage 220-240 V
~
50 / 60 Hz
Maximum connected load power 7.2 kW
Weight
Net 13.2 kg
Gross 16.1 kg
Cooking zones
Position Diameter Power
Right Front 210 mm 2200 W / Boost 3200 W
Right Rear 145 mm 1400 W / Boost 2000 W
Flex Plus Front - 1800 W / Boost 2600 W
Flex Plus Rear - 1800 W / Boost 2600 W
Flex Plus Centre - 1800 W / Boost 3000 W
Complete Flex Plus - 3300 W / Boost 3600 W
NZ6000K NZ64N9777_NZ64N7777_DG68-01073A-00_EN+FI+NO+DA+SV.indb 31 2/19/2018 12:02:29 PM
Loading ...
Loading ...
Loading ...