Loading ...
Loading ...
Loading ...
EN 10
Timer
The timer can be used to set cooking time for a maximum of 99 minutes (1 hour and 39 minutes) for all cooking zones.
Select the cooking zone to be used with the timer (an illuminated dot appears to the bottom right hand side of the heat setting indicator
on the display), press the button with the clock symbol then set the desired cooking time using the buttons “+” and “-” of the timer function
(see gure). After a few seconds, the timer begins the countdown (an illuminated dot is visible next to the zone for which the timer has been
activated). Once the set time has elapsed, an acoustic signal sounds and the cooking zone switches off automatically.
To deactivate the timer, press the “-” button until the display shows “0:0” or hold the button with the clock symbol for at least 3 seconds.
To set the timer for another zone, repeat the points above. The timer display always shows the timer for the selected zone or the shortest timer.
To change or switch off the timer, press the zone selection button for the timer in question.
Control panel warnings
Residual heat indicator
The hob is tted with a residual heat indicator for each cooking zone. These indicators alert the user when cooking zones are still hot.
If the display shows ,the cooking zone is still hot. If the residual heat indicator of a given cooking zone is lit, that zone can be used, for
example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for your induction hob, the message “no
pot” will appear in the display (see gure at side). If no pot is detected within 60 seconds, the hob switches off.
Special functions
Some models have special functions:
Fast boil function (Booster where is available)
This function, only present on some cooking zones, makes it possible to exploit the hob’s maximum power (for example to bring water to the boil very quickly).
To activate the function, press the “+” button until “P” appears on the display. After 10 minutes’ use of the booster function, the appliance automatically sets the
zone to level 9 (except when using the exi cook function).
EcoBooster
With the hob turned on, select the cooking zone with the Eco Booster symbol inside it .
To enable/disable the function, press the button .
The EcoBooster function allows the water to be brought to the boil and kept boiling, avoiding spilling, with a reduction of energy consumption.
To optimize this control and ensure the best energy saving, it is advisable to use a pot with bottom width similar to that of the selected cooking zone. The quality
of the pot used, the presence or absence of the lid or salt, can affect the performance of the function. 2 to 3 liters of water (preferably at room temperature) is
recommended, and it is advisable not to use the lid.
In any case it is advisable to keep a check on the boiling conditions and the amount of residual water.
Flexi cook
This function allows you to use the cooking area as two separate cooking zones or as an extra-large single zone.
It is perfect for oval, rectangular and elongated pans (with maximum base dimensions of 38x23 cm) or more than one standard pan in the same time. In order
to activate the exicook function, switch on the hob, press simultaneously the 2 selecting buttons of the zones as shown in the picture below: the two cooking
zone displays show level “0”; both dots next to the level number are lit, indicating that the Flexi cook is activated.
To change the power level, press the - / + buttons (from 1 to a maximum of 9 or P). To deactivate the Flexi cook function, press simultaneously the 2 selecting
buttons of the zones. To switch off the zones instantly, hold one of the zone selection button for 3 seconds.
The message “no pot” will appear on the display of the zone that is not able to detect any pot (because of missing pot, or misplaced or not suitable
for induction hob). This message remains active for 60 seconds: in this time you can add or slide pots within the exicook area as you prefer.
i
Loading ...
Loading ...
Loading ...