Loading ...
Loading ...
Loading ...
7
Place the purifier on a flat, stable surface in the room requiring treatment.
To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window, item of furniture
or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space on each side of the appliance.
Make sure that the plastic packaging protecting the filters has been removed before using the appliance.
Before the first use, ensure the voltage, frequency and power of your appliance suit your electric supply.
Your appliance can operate using an unearthed plug. It is a class II (double electrical insulation ).
Before switching on your appliance, ensure that:
- the appliance is completely assembled as described in the safety instructions,
- the appliance is placed on a stable, horizontal surface,
- the appliance is positioned in accordance with the instructions given in this manual,
- the air inlets and the oultet grid are completely unobstructed,
- the 4 filters and front panel have been correctly installed (See section "Disassembling/Reassembling filters").
IMPORTANT: You are advised to switch off and unplug the appliance when not in use.
This appliance is equipped with a device that automatically prevents it from operating if the front door is not
correctly assembled.
Inserting and replacing the filters
This appliance is equipped with 4 types of filters:
NB: For optimum performance of the appliance, only use filters provided by TEFAL.
To replace the filters, follow the instructions in the section “Disassembling/Reassembling filters” .
Please note: certain filters may emit a temporary slight odour, due to the transport and storage conditions.
Connect the power cord and press the start button (9).
Your appliance will be preset to automatic mode the first time you turn it on.
Thanks to its infrared particle sensor and its gas sensor, it detects the level of pollution in the room and
automatically adjusts the filtration speed accordingly in auto day or auto night mode.
The air quality indicator changes color to indicate the air quality in the room.
WHERE TO INSTALL THE APPLIANCE
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Pre-filter Active carbon filter NanoCaptur filterHEPA filter
SWITCHING THE APPLIANCE ON
Air quality Air quality indicator color
Excellent Blue
Average Purple
Poor Red
EN
TE_PURIFICATEUR_PU6075K0_1800143831_01.qxp_1800143831/01 02/06/2017 13:41 Page7
Loading ...
Loading ...
Loading ...