Loading ...
Loading ...
Loading ...
E9 E10
filter basket. An overflow may cause personal injury or
damage to property.
CAUTION! To reduce the risk of damaging the
decanter and/or the risk of personal injury, do not add
cold water to the decanter if the decanter is already
hot. Allow the decanter to cool before using.
BREWING COFFEE NOW
1. For Programmable models: Press the ON Button to begin
the brewing cycle. The green indicator light will turn on to
signal that the coffeemaker is brewing. When the brewing
cycle is complete the coffeemaker switches over to the
warming mode. Your coffeemaker will keep your coffee
hot for 1 hour, then automatically shut off.
To turn the coffeemaker off, push the OFF button.
For Switch models: Press the ON/OFF Switch on the control
panel so the green indicator light illuminates. The light
indicates that the coffeemaker is on and that the brew cycle
will begin. To turn off the coffeemaker, push the switch so
the light is no longer illuminated.
While the coffee is brewing, the Pause ’n Serve feature
allows you to sneak a cup of coffee from the decanter.
REPLACE THE DECANTER ON THE WARMING PLATE WITHIN
30 SECONDS TO PREVENT OVERFLOW AND POSSIBLE INJURY.
If the brew basket overflows or fails to empty into
the decanter, do not open the brew basket. Turn off
the coffeemaker. Unplug the coffeemaker and wait
for the contents to cool before handling.
2. After the used coffee grounds have cooled, carefully
discard them.
3. Make sure the decanter is empty before starting to brew
coffee.
4. Be sure to turn your coffeemaker off when no longer using it.
!
!
BREWING COFFEE LATER
For Programmable Models Only
1. You must first set the time when you would like the
coffeemaker to begin brewing your coffee as described
in “Setting the Clock and the Delay Brew Timer” section.
2. Prepare your coffeemaker as described in “Adding Water
and Ground Coffee” section.
3. To activate DELAY BREW and program your coffeemaker
to brew coffee at a later time, press the Delay Brew
button. The DELAY indicator light will illuminate. The
coffeemaker is now set to automatically brew coffee at
the pre-set later time.
4. At the pre-set time the green indicator light will turn on
and the DELAY light will turn off, indicating the brewing
has started.
5. The coffeemaker warming plate will keep your coffee hot
for 1 hour and then automatically turn off.
As a safety feature, your coffeemaker will NOT start again
automatically the next day. If you want your coffee to brew
at the same time the following day, simply add a new filter,
coffee and water and set DELAY BREW, by repeating
Steps 2 and 3 above.
To cancel DELAY BREW: Press the OFF button. The DELAY
BREW green indicator light will turn off.
CLEANING AND MAINTAINING YOUR
COFFEEMAKER
Daily Cleaning:
Always unplug the coffeemaker and allow to cool before
cleaning. Remove the filter basket, permanent filter (not
included on all models), decanter and decanter lid and wash
them in a solution of hot water and mild liquid soap.
DR Series_16ESM1(4-Cup).indd 11-12 4/12/16 4:47 PM
Loading ...
Loading ...
Loading ...