Loading ...
Loading ...
Loading ...
Cleaning and maintenance
27
EN
Removing racks/trays support frames
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To remove the guide frames: Pull the frame
towards the inside of the oven to unhook it
from its groove A, then slide it out of the
seats B at the back.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
Removing the side oven racks/trays
support frames
Pull the frame upwards to remove it from its
side housings. Replace the frame correctly
when you have finished cleaning.
Cleaning the top part (roof)
The auxiliary oven is fitted with a tilting
heating element which facilitates cleaning
the top part (roof) of the oven.
1. Delicately push the middle section of the
upper heating element towards the rear
of the oven to release it from the central
bush.
2. Gently lower the element until it stops.
When you have finished cleaning, put the
heating element back in position.
Improper use
Risk of damage to the appliance
• Do not bend the heating element
excessively while cleaning.
Loading ...
Loading ...
Loading ...