Loading ...
Loading ...
Loading ...
B
22
II
I N S T R U M E N T PA N E L
Display
As soon as you open the driver's
door, the instrument panel displays
the total mileage and trip mileage.
When you switch on the ignition, it
scrolls through the following infor-
mation:
Maintenance indicator.
The engine oil level indicator.
Total mileage.
It also displays the trip mileage or
trip computer information (depen-
ding on the memory status since
the vehicle was last stopped).
Trip mileage recorder reset
This can operate when the ignition
is switched on.
Press
B
to show the trip mileage,
then give a long press on
B
to reset
the counter to zero.
Engine oil level indicator
When the ignition is switched on, the maintenance indicator is displayed
for a few seconds, followed by the engine oil level for a few seconds. See
"Maintenance indicator".
An incorrect engine oil level can seriously damage your engine.
Fuel low/Fuel gauge
When the tank is full, all 8 bars are lit up. They go out one by one.
If the fuel low warning lamp comes on accompanied by a beep,
there remain around 4 to 6 litres of fuel in the tank.
If "black panel" mode is active and there are only around 4 to 6 litres of fuel
in the tank, that will make the fuel low warning lamp come on.
Flashing of
"OIL"
indicates an oil level that is
below the minimum.
Check using the manual dipstick. See "Levels".
Check the engine oil level on horizontal ground
with the engine having been switched off for at
least 15 minutes.
Contact a CITROËN dealer.
A ashing of
"OIL –"
indicates a
malfunctio-
ning of the indicator
.
Contact a CITROËN dealer.
Display of
"OIL OK"
indicates normal functioning.
Loading ...
Loading ...
Loading ...