Loading ...
Loading ...
Loading ...
SECTION 2 MowyourwATER JLTERWORKS
I
2A.
I
FACE PLATE TIMER FEATURES
TIMER "POWER-OUTAGE MEMORY"
Ifelectrical power to the timer goes off, the "memory"
built into timer circuitry keeps all settings for 6 hours
(minimum) or more. The display is blank and the filter
will not recharge. When electrical power comes on,
1 of 2 things will happen.
1. The present time of day will show, meaning the
timer memory has kept all settings.
NOTE:
Ifthe filter was in a recharge when power was lost,
it will now finish the cycle.
2. The display will show a time, but it will be
flashing• The timer memory did not keep the
time settings and they must be reset, pages 7
and 8.
The flashing display is to remind you to reset
the timer.
NOTE:
When power comes on, the flashing display
returns to a time of 12:00 AM Sunday, then begins
to keep time again. If you do not reset all time
settings, the filter will recharge 3 days each week.
However, recharges will most likely be on the
wrong days and at the wrong time.
If the filter was in a recharge when power went off,
the valve will return to service position without
finishing the cycle. If your water has a purple
color...
•. use RECHARGE NOW (see page 10) to start
another recharge, or...
•.. open 1or more filtered water faucets and allow
water to run until clear, with no more purple color•
11
Loading ...
Loading ...
Loading ...