Loading ...
Loading ...
Loading ...
Operation
Fig. 101 Service position.
Before assembling, place the ball-headed bar
in service position.
–
Turn key
A
fully in the direction of arrow
1
››› Fig. 100
.
–
Ho
l
d the ball-headed bar with your left
hand.
–
Pull manual regulator
B
outward in the di-
rection of arrow
2
and turn it fully in the
direction of arrow
3
.
The manual regulator will remain in this posi-
tion.
Service position
›
›› Fig. 101
●
K
ey
C
is in an open position – the key ar-
row points to the “unlocked” symbol. The key
cannot be removed from the key slot.
●
The
D
locking balls may be fully inserted
into the body of the ball-headed bar by ap-
plying some pressure.
●
The red
E
marking on the manual regula-
tor points towards the white marking on the
ball-headed bar.
●
Between the manual regulator and the
body of the ball-headed bar there is a clearly
visible space of approximately 4 mm
F
.
Once the ball-headed bar has been posi-
tioned like this, it will be ready to be placed
in the clamping bush.
WARNING
Do not use the ball-headed bar if it cannot be
correctly placed in the service position.
CAUTION
The key cannot be removed from the manual
regulator key slot when it is in the service po-
sition.
Assembling the ball-headed bar
Fig. 102 Placing the ball-headed bar/locking
and removing the key.
118
Loading ...
Loading ...
Loading ...