Loading ...
Loading ...
Loading ...
ENGLISH
20
USER SETTINGS
PBP
1
To view the OSD menu, press the Menu ( ) button at
the bottom of the monitor.
2
Go to PBP using the monitor buttons.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
Set the desired option and press the
PHQX
button.
5
Use Menu ( ) or the
PHQX
button to exit the OSD menu.
Each option is described below.
Menu > PBP Description
Sub Displays the screens of two input modes on one monitor.
PBP Connection
Sub Screen (Right)
HDMI 1 HDMI 2 (Mini) DisplayPort
Main
Screen
(Left)
HDMI 1 - X O
HDMI 2 X - O
(Mini) DisplayPort O O -
Sound Out Changes the audio output in PBP mode.
Swap Toggles between the main screen and sub screen in PBP mode.
Sub Full Converts the sub screen in PBP mode to wide screen.
Ratio Adjusts the aspect ratio of the main screen or sub screen.
Main Wide Displays the video to fit the PBP screen, regardless of the
video signal input.
Original Displays the video in the aspect ratio of the video signal
input on the PBP screen.
Sub Wide Displays the video to fit the PBP screen, regardless of the
video signal input.
Original Displays the video in the aspect ratio of the video signal
input on the PBP screen.
y
When the Sub mode is Off, Sound Out, Swap, Sub Full, and Ratio menus become disabled.
The Main/Sub options for Ratio become disabled if there is no signal.
y
The optimal resolution for PBP mode is set automatically when PBP mode is set.
NOTE
PBP
Quick
Settings
Sub Off
>
Sound Out Main
>
PBP
Swap
Sub Full
Picture
Ratio
>
General
Reset
PBP Preview
HDMI1
◄: Back ▲/▼: Move / ►: Ok
Loading ...
Loading ...
Loading ...