Loading ...
Loading ...
Loading ...
BOILASSIST
The function automatically adjusts the temperature
of water so that it does not boil over once it
reaches the boiling point.
If there is any residual heat ( / /
) on the cooking zone you want to
use, an acoustic signal is emitted and
the function does not start.
1. Touch to activate the hob.
2. Touch to activate the function.
A blinking
appears for cooking zones on
which you can presently use the function.
3. Touch the control bar of any available cooking
zone for which you want to start the function
(between the heat setting 1-9).
The function starts.
If you do not choose any cooking zone within 5
seconds the function does not activate.
Once the function starts the indicators
above the symbol come on one
after another until the water reaches
the boiling point.
When the function detects the boiling point the hob
emits an acoustic signal and the heat level
automatically changes to 5.
If all cooking zones are already in use
or there is some residual heat on all of
them, the hob emits a beep sound, the
indicators above blink and the
function does not start.
To deactivate the function touch (the function
deactivates and the heat setting goes down to 0) or
touch the control bar and adjust the heat setting
manually.
The Pause function and lifting of the
pot deactivate BoilAssist.
AUTOMATIC HEAT UP
Activate this function to get a desired heat setting
in a shorter time. When it is on, the zone operates
on the highest setting in the beginning and then
continues to cook at the desired heating setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking zone:
touch ( comes on). Immediately touch a
desired heat setting. After 3 seconds comes on.
To deactivate the function: change the heat
setting.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone:
touch . comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch again and
again until the indicator of a necessary cooking
zone comes on.
To activate the function or change the time:
touch or of the timer to set the time (00 - 99
minutes). When the indicator of the cooking zone
starts to flash slowly the time counts down.
To see the remaining time: set the cooking zone
with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone
with and touch . The remaining time counts
back to 00. The indicator of the cooking zone goes
out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch .
9
Loading ...
Loading ...
Loading ...