Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
and appear alternately.
There is too much or too little
water in the pot.
You boiled some food other
than water and potatoes. The
boiling point was moved in
time and BoilAssist could not
work properly.
Refer to "Hints and Tips". Only
boil water and potatoes with
the use of BoilAssist.
You hear a beep sound, the in-
dicators above blink and
BoilAssist does not start.
None of the cooking zones is
ready to be used with BoilAs-
sist. There is some residual
heat on the cooking zones you
want to choose or they are still
in use.
Finish your previous cooking
activities and choose a free
cooking zone without any re-
sidual heat.
and a number come on.
There is an error in the hob. Deactivate the hob and acti-
vate it again after 30 seconds.
If comes on again, discon-
nect the hob from the electrical
supply. After 30 seconds, con-
nect the hob again. If the prob-
lem continues, speak to an Au-
thorised Service Centre.
You can hear a constant beep
noise.
The electrical connection is in-
correct.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the in-
stallation.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
TECHNICAL DATA
RATING PLATE
Model ZIAN844K PNC 949 595 697 00
Typ 62 D4A 01 AA 220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW Made in Germany
Ser.Nr. ................. 7.35 kW
ZANUSSI
16
Loading ...
Loading ...
Loading ...