Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
The hob deactivates. You put something on the sen-
sor field .
Remove the object from the
sensor field.
Residual heat indicator does
not come on.
The zone is not hot because it
operated only for a short time
or the sensor is damaged.
If the zone operated sufficiently
long to be hot, speak to an Au-
thorised Service Centre.
Hob²Hood does not work. You covered the control panel. Remove the object from the
control panel.
You use a very tall pot which
blocks the signal.
Use a smaller pot, change the
cooking zone or operate the
hood manually.
Automatic Heat Up does not
operate.
The zone is hot. Let the zone become suffi-
ciently cool.
The highest heat setting is set. The highest heat setting has
the same power as the func-
tion.
The heat setting changes be-
tween two levels.
Power management operates. Refer to "Daily use".
The sensor fields become hot. The cookware is too large or
you put it too near to the con-
trols.
Put large cookware on the rear
zones, if possible.
comes on.
Child Safety Device or Lock
operates.
Refer to "Daily use".
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is unsuitable. Use suitable cookware. Refer
to "Hints and tips".
The diameter of the bottom of
the cookware is too small for
the zone.
Use cookware with correct di-
mensions. Refer to "Technical
data".
and appear alternately.
The power is too low due to
unsuitable cookware or an
empty pot.
Use the appropriate type of
cookware. Refer to "Hints and
Tips" and "Technical Data".
Do not activate any zone with
an empty pot on it.
and appear alternately.
The pot is empty or contains
some liquid other than water,
e.g. oil.
Avoid using the function with
liquids other than water.
15
Loading ...
Loading ...
Loading ...