Loading ...
Loading ...
Loading ...
5
INSTALLATION
Fixing the rangehood
Use screw and washer to fasten the rangehood to the
wood support from upper side.
Ø 6mm washer
M6 x 40
screws
Fixing the rear cover
Use screw to x the rear cover.
ST 3×12 self tapping screws
Installing the air intake grill
Carbon lters aren’t required for standard ducted
installation. Remove and replace with air intake grills
provided.
air intake grill
Fixing the ue pipe
Fix a Ø 150mm, non-combustible, rigid ue pipe to the
exhaust transition duct using cable ties or duct tape.
Fixing a Ø 125mm ue pipe
Fix the Ø 150mm to Ø 120mm converter to the rangehood
rst, then x a Ø 125mm noncombustible ue pipe to the
exhaust transition duct using cable ties or duct tape.
IMPORTANT!
If using a exible duct, always install duct with the
wire helix pulled taut to minimise pressure and noise.
Ducting accessories - WRR626SB, WRR926SB
For best performance Ø 150mm ducting is recommended
(Ø 125mm ducting can be used, but will reduce the
airow of the cooker hood).
roof cowl
AR150RC
(AR125RC)
AR150F
(AR125F)
AR150FD
(AR125FD)
AR125FJD
with damper
wall vent kit
AR150WV
(AR125WV)
flexible duct
ACC205
Accessories can be bought from your local appliance
retailer, or in Australia / New Zealand at our online spare
parts and accessories store: shop.electrolux.com.au
Ducted recirculating installation
If ducted recirculating installation is used, carbon lters
are recommended. The carbon lters are already
installed in the rangehood on delivery.
AR150WV
(AR125WV)
Carbon lters diminish cooking odours in the recirculated
air. Depending on the frequency of use and the type
of cooking, the expected life of carbon lters is 1-6
months. Using carbon lters with reduce the airow of
the rangehood.
carbon lter
rigid flue pipe
flexible duct
flue joiner
carbon filter (2)
bend AR150FD
(AR125B) for
Ø 150 bend use
Loading ...
Loading ...
Loading ...