Loading ...
Loading ...
Loading ...
233If and when
Dipped beam headlights
Fig. 153 Dipped beam
headlights
Fig. 154 Dipped beam
headlights
– Raise the bonnet.
– Move the loop ⇒ fig. 153
1
in the direction of the arrow and
remove the cover.
– Remove the connector ⇒ fig. 154
2
from the bulb.
– Unclip the retainer spring ⇒ fig. 154
3
pressing inwards to the
right.
– Extract the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
– Fit the connector.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Turn signal lights
Fig. 155 Turn signal
– Raise the bonnet.
Safety First Operating Instructions Practical Tips Technical Specifications
Loading ...
Loading ...
Loading ...