Loading ...
Loading ...
Loading ...
232 If and when
– Raise the bonnet.
– Move the loop
1
in the direction of the arrow and remove the
cover ⇒ fig. 149.
– Remove connector ⇒ fig. 150
2
by pulling outward.
– Remove the bulb by pulling it out and fitting the new one.
– Installation is done in the reverse order.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Main beam headlights
Fig. 151 Main beam
headlights
Fig. 152 Main beam
headlights
– Raise the bonnet.
– Move the loop
1
in the direction of the arrow and remove the
cover ⇒ fig. 151.
– Remove connector ⇒ fig. 152
2
by pulling outward.
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
– Fit the cover and close the strap. Make sure that the gasket sits
well on the casing cover during the operation.
– Check whether the new bulb is working.
Loading ...
Loading ...
Loading ...