Loading ...
Loading ...
Loading ...
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
177
Remote control key - replacing the
battery
The battery
5
for the remote control key may
need to be replaced.
The battery for the remote control key should
be replaced if:
•
the information symbol in the combined
instrument panel illuminates and the dis-
play shows
Car key battery low See
manual
and/or
•
the locks repeatedly do not react to sig-
nals from the remote control key within
20 metres from the car.
Opening
Slide the spring-loaded catch to the
side.
At the same time pull the key blade
straight out backwards.
Insert a 3 mm slot screwdriver in the
hole behind the spring-loaded catch and
gently prize the remote control key up.
NOTE
Turn the remote control key over with the
buttons facing up, this is to avoid the bat-
teries falling out when it is opened.
IMPORTANT
Avoid touching new batteries and their
contact surfaces with your fingers as this
may impair their function.
Battery replacement
Closely study how the battery/batteries
are secured on the inside of the cover,
with regard to their (+) and (–) sides.
Remote control key (one battery)
1. Carefully prize out the battery.
2. Install a new one with the (+) side down.
Remote control key with PCC* (two
batteries)
1. Carefully prize out the batteries.
2. First install one new one with the (+) side
up.
3. Position the white plastic tab in between
and finally install a second new battery
with the (+) side down.
5
Remote control key with PCC has two batteries.
Loading ...
Loading ...
Loading ...