Loading ...
Loading ...
Loading ...
en
38
Fault Possible cause Remedial action
Controls have reduced
luminosity.
When the appliance is
not used for some
time, the display on
the fascia switches
to energy saving
mode.
As soon as the appliance is again
used, e.g. the door is opened,
the display switches back to normal
illumination.
Displays
do not illuminate.
Power failure; the fuse
has been switched off;
the mains plug
has not been inserted
properly.
Connect mains plug. Check whether
the power is on, check the fuses.
Warning signal
sounds.
The alarm button is lit.
Fig. 2/2
Fault – the freezer
compartment is too
warm!
To switch off the warning signal,
press the alarm button 2.
Appliance is open. Close the appliance.
Ventilation openings
have been covered.
Ensure that there is adequate
ventilation.
Too much food was
placed in the freezer
compartment at once.
Do not exceed max. freezing
capacity.
When the fault has been eliminated,
the alarm button goes out shortly
afterwards.
Loading ...
Loading ...
Loading ...