GE - General Electric ZBD9900R00II User Manual - Page 18

Loading ...

Dishwasher

Settings

Reprogramming

Some of the machine’s functions can be reprogrammed. You can change the dishwasher’s programming

by using the keypad. The selection will be retained until the next time you reset this function.

Even if the machine is turned o at the main switch or loses power for any other reason, all selections reg-

istered before the interruption of power will be retained.

Child-safe button lock

You can prevent a child starting the machine by accident or changing the settings by programming the

machine with a button lock, which requires the Temperature and Drying buttons to be pressed simultane-

ously to start up the machine. The button lock will automatically be reactivated after three minutes.

1. Switch o the dishwasher with the main switch.

2. Hold in the TEMP BOOST and HEAT DRY buttons while pressing the main switch. The

Temperature, Drying and start symbols will ash. Release the Temperature and Drying

buttons.

3. Press the CYCLE button – when the Auto wash symbol is lit,

the button lock has been activated.

4. Then press the START/RESET button to store the setting.

or Reset:

1. Switch o the dishwasher with the main switc.

2. Hold in the TEMP BOOST and HEAT DRY buttons at the same time as pressing the main

switch

3. Press the CYCLE – when the Auto wash symbol goes out,

the button lock has been deactivated

4. Then press the START/RESET button to conrm the setting.

Loading ...

GE - General Electric GE Monogram Fully Integrated Dishwasher ZBD9900R00II