GE - General Electric GE Monogram Fully Integrated Dishwasher ZBD9900R00II

User Manual - Page 12

For ZBD9900R00II.

PDF File Manual, 54 pages, Download pdf file

Loading ...
Loading ...
Loading ...
12
Using the Dishwasher
Dishwasher
Water
Temperature
This dishwasher can be plumbed to either a hot or
cold water line.
Hot water line connection: For effective cleaning
and to prevent dish damage, the entering water
supply should be at least 120°F (49°C) and not
more than 140°F (60°C). You can check the water
temperature with a candy or meat thermometer.
Turn on the hot water faucet nearest the
dishwasher, place the thermometer in a glass and
let the water run continuously into the glass until
the temperature ceases to rise.
Cold water line connection: The dishwasher’s
water heater will bring the water temperature to
the appropriate level for cleaning.
NOTE: Most cycle times will increase when
plumbed to a cold water line.
Use a
Rinse
Agent
A rinse agent improves dry performance,
reduces spots and prevents new film buildup
on your dishes, glasses, flatware, cookware
and plastic. Cascade Crystal Clear
®
is the
recommended rinse agent for Monogram
Dishwashers.
The rinse agent dispenser holds 4.7 oz. of rinse
agent. Under normal conditions, this will last
approximately one month. Try to keep it full,
but do not overfill.
To fill the rinse agent dispenser, make sure the
dishwasher door is fully open.
Rotate the dispenser cap counterclockwise and
lift it out. Add rinse agent until the indicator
window shows full.
Clean up any spilled rinse agent with a damp
cloth. Replace the dispenser cap.
The amount of rinse agent released into the final
wash can be adjusted. The factory setting is at
the midpoint. If there are rings of calcium (hard
water) spots on dishes, try a higher setting. If
there is foaming, use a lower setting.
To adjust the setting, remove the dispenser
cap; then turn the adjuster counterclockwise to
increase the amount of rinse agent or clockwise
to decrease the amount of rinse agent dispensed.
Lighting
Features
Interior Lights
The interior Halogen lights provide better visibility
for loading and unloading. They turn on when
the door is opened and turn off when the door is
latched.
Do not attempt to replace the bulbs. If light bulb
replacement is necessary, please contact the
GE Answer Center for service by calling
1.800.626.2000.
1. Compartment for main wash dishwash-
er detergent
2. Compartment for pre-wash detergent
3. Rinse aid cover
4. Detergent compartment cover
3 (Rinse agent adjuster
is located under the cap)
4
1
2
Loading ...
Loading ...
Loading ...