Loading ...
Loading ...
Loading ...
16_ operating
USING THE COLD WATER
DISPENSER
Using the Water dispenser
(RF261B, RF26H)
Place a glass underneath
the water outlet and push
gently against the water
dispenser lever with your
glass. Make sure the
glass is in line with the
dispenser to prevent the
water from splashing out.
PUSH
If you have just installed the refrigerator or installed
a new water fi ter, Flush 3 gallons through filter
before use (flush approximately 6 minutes).
Make sure water flows cleanly before drinking.
If you have a long vacation or business
trip, close the water valve and shut o
the water supply to the Refrigerator.
This will help prevent accidental leakages.
• Water clouding phenomenon
• All water provided to refrigerators flows
through the core filter which is an
alkaline water filter. In this process, the
pressure in the water that has flowed
out of the filter gets increased, and
oxygen and nitrogen become saturated.
When this water flows out in the air, the
pressure plummets and the oxygen and
nitrogen get supersaturated so that they
turn into gas bubbles. The water could
look misty due to these oxygen bubbles.
The water may look temporarily cloudy
due to these oxygen bubbles. After a
few seconds, the water will look clear.
• The water tank’s capacity is
approximately one third (1/3) of a gallon.
Please wait 1 second before removing
the cup after dispensing water to
prevent spills.
CAUTION
DA68-02601B-14.indb 16 2018. 10. 8. 오후 5:04
Loading ...
Loading ...
Loading ...