Loading ...
Loading ...
Loading ...
14_ operating
CHANGING THE WATER FILTER
To reduce risk of water damage to your
property DO NOT use generic brands
of water filters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of
a generic water filter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you
know when it is time to change
your water filter cartridge.
To give you time to get a new filter,
the red light comes on just before
the capacity of the current filter
runs out.
(Red)
Changing the filter on time provides you with the
freshest, cleanest water from your refrigerator.
1. Shut o the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
2
1
• To change the water filter more easily,
shut o the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick. If you are having diculties, grip the
water filter firmly and pull it hard.
• When you pull the
water filter, a little
water can leak from
the opening. This is
normal.
3
2
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
• To prevent overflow, empty the water filter tray
( 3 ) and dry around the filter case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until
it locks.
• If you have trouble inserting the water
filter because of high water pressure,
shut o the water supply valve.
• The locked symbol should be lined up with the
indicator line.
WARNING
4
5. After removing the
old water filter and
installing a new reset
the indicator by
pressing the “Fridge”
and “Power Cool”
button simultaneously
for about 3 seconds.
6. If you turned o the water supply, turn it back on.
• For a replacement water filter, you can
visit your local home Improvement
center or contact the Samsung Parts
distributor.
• Be sure the replacement water filter has the
SAMSUNG logo on the box and on the water
filter. Link : http://www. samsungparts.com
Removing any residual matter inside
the water supply line after installing
the water filter.
1. Turn ON the main
water supply and
supply water to the
refrigerator.
2. Run 1 Gal of water through the dispenser until
the water runs clear (approx. 6 to 7 minutes).
This will clean the water supply system and
remove air from the lines.
3. If after pour 1 Gal the water doesn’t turn
clear is possible an additional flushing in the
household lines.
4. Open the Refrigerator door and make sure
there are no water leaks coming from the
water filter.
• Be sure to flush the dispenser system
thoroughly, otherwise water may drip
from the dispenser.
• This means that there is still air in the line.
DA68-02601B-14.indb 14 2018. 10. 8. 오후 5:04
Loading ...
Loading ...
Loading ...