Loading ...
Loading ...
Loading ...
Options
41
If Optimize Standby is switched on
(see "Options - Optimize Standby"),
the display will go out after a few min-
utes, leaving just the Start/Stop indi-
cator light flashing slowly.
Press any button to switch the display
back on again for a few minutes.
The time up until the program starts will
count down in the display in hours for
durations above 10 hours, and in min-
utes for durations below 10 hours.
When the set time is reached, the pro-
gram selected will start automatically.
The time remaining will appear in the
display and the Delay Start indicator
light will go out.
How the Delay Start time is shown in
the display:
up to 59 minutes:
e.g., 30 minutes = .
1 hour up to 9 hours 30 minutes:
e.g., 5 hours = .
over 10 hours:
e.g., 15 hours =
If you open the door during the delay
start time, you must then press the
Start/Stop button to continue the de-
lay start time.
Starting a program before the delay
start time has elapsed:
A program can be started before the
delay start period has elapsed.
Proceed as follows:
Press the Start/Stop button for at
least one second.
The Delay Start indicator light goes out
and the Start/Stop indicator light
flashes.
Press the Start/Stop button again.
The program cycle will begin. The Start/
Stop indicator light will come on.
Loading ...
Loading ...
Loading ...