Loading ...
Loading ...
Loading ...
11
Installation Instructions
REVERSING THE DOOR SWING
2
When reversing the door swing:
• Read the instructions all the way through before starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for
the doors.
IMPORTANT: Once you begin, do not move the cabinet
until door-swing reversal is completed.
These instructions are for changing the hinges from
WKHULJKWVLGHWRWKHOHIWVLGH³LI\RXHYHUZDQWWRFKDQJH
the hinges back to the right side, follow these same
instructions and reverse all references to left and right.
IMPORTANT NOTES
Phillips screwdriver
TOOLS REQUIRED
Masking tape
T20 or T25 Torxdriver
(needed for some
models)
5/16” hex-head
socket driver
5/16” open-end
wrench
Putty knife or thin-
blade screwdriver
2.1 Tape the door shut with masking tape.
2.2 With a 5/16” hex-head socket driver, remove the
screws that hold the top hinge to the cabinet.
REMOVE THE FREEZER DOOR
2
2.3 Lift the hinge straight up to free the hinge pin
from the socket in the top of the door and set it
aside, along with its screws.
2.6 Transfer the 2 screws from the opposite side of
the cabinet to the screw holes vacated by the top
hinge removal.
2.5 Set the door on a non-scratching surface with the
outside up.
2.4 Remove the tape and tilt the door away from the
FDELQHW/LIWLWRȺWKHFHQWHUKLQJHSLQ
Top Hinge
1.1 Unplug the refrigerator from its electrical outlet.
1.2 Empty all door shelves, including the dairy
compartment.
CAUTION: 'RQRWOHWHLWKHUGRRUGURSWRWKHÀRRU7R
do so could damage the door stop.
BEFORE YOU START
1
Loading ...
Loading ...
Loading ...