Loading ...
Loading ...
Loading ...
6
PLACEMENT AND INSTALLATION
To ensure that your beer dispenser works at the maximum efficiency it was
designed for, install it in a location where there are proper air circulation and
electrical connections.
Choosing the Right Place
Choose a location where the beer dispenser will be away from any heat sources
and will not be exposed to direct sunlight.
Remove all packing materials before using the beer dispenser.
Place the machine on a smooth, flat and sturdy surface.
Your appliance is not designed to operate in enclosed spaces. When placing
your unit, make sure you allow at least 4” of clearance at the sides, rear and top
to allow for adequate airflow.
Installation
The SBC635M beer dispenser meets UL Standard 250 and is suitable for
residential use.
Applications
Connect this appliance to a 3-prong power supply socket (which has a ground
terminal).
Connecting to Power Supply
If you only have a two-prong outlet, have it replaced by a qualified
technician with an outlet that meets the local codes
DO NOT USE AN EXTENSION CORD
.
Required nominal voltage and frequency are indicated on the rating plate. The
connection to the power supply and grounding has to be made according to
current standards and regulations. The appliance resists temporary voltage
fluctuations with a tolerance of ±10%.
Once connected, allow the appliance to operate empty for two to three hours
before putting a beer keg inside.
Loading ...
Loading ...
Loading ...