Loading ...
Loading ...
Loading ...
14
MAINTENANCE OF THE BEER DISPENSER
To optimize cooling and to save energy at the same time, dust the back of the
beer dispenser periodically.
Cleaning
The interior should be cleaned regularly. Use a soft towel or sponge that has
been dampened in a solution of mild detergent. Rinse with clean water and dry
with a cloth. Leave the door open for a while to allow the unit to dry thoroughly
before turning the power back on.
Do not use a hard brush, steel wool, wire brush, or abrasives such as toothpaste,
or organic solvents like alcohol or acetone to clean the beer dispenser.
When cleaning or rinsing the unit, be careful not to let the control panel or any
electrical components become wet.
If the machine will be out of service for more than three weeks, unplug it and
clean and dry it thoroughly. Allow the door to remain open slightly to prevent the
buildup of mold and odors.
Out of Service
Firmly fix any loose items inside the beer dispenser with tape. Tape the door shut
so it will not open during transportation.
Transporting the Unit
Loosen the two foot brakes before moving the unit.
Keg sizes that can be used in your beer dispenser:
Specifications of Beer Kegs
1/2 barrel 59 liters 15.5 gals. 1,984 oz. 164 / 12-oz. Glass
1/4 barrel 30 liters 7.8 gals. 992 oz. 82 / 12-oz. Glass
1/6 barrel 20 liters 5.2 gals. 661 oz. 55 / 12-oz. Glass
1/8 barrel 15 liters 4.0 gals. 496 oz. 41 / 12-oz. Glass
Note: Our beer dispenser accepts almost all brand name 1/2 kegs. However,
Coors’ kegs do not fit in our unit.
Loading ...
Loading ...
Loading ...