Loading ...
Loading ...
Loading ...
9
Main Cooktop Controls
Controls lock pad
Keep warm pad
Minute timer padCooktop main power pad
The Cooktop POWER
key pad enables the
entire Cooktop.
To power the cooktop,
touch and hold the
POWER key pad for
2 seconds. A beep will
The Cooktop may
be locked in order to
prevent the cooktop
from accidentally being
turned ON.
To turn ON the Controls
Lock feature, make sure
the unit is powered OFF
Use the WARM key pad
to activate the Keep
warm setting for any
of the elements. First,
activate the element by
pressing the ON/OFF
key pad, then touch
the WARM key pad
Fig. 3
Fig. 5
Fig. 4
Fig. 6
Fig. 7
Fig. 1 Fig. 2
sound and the Power LED will glow (See Fig. 2).
The cooktop will be in a ready mode for 10 seconds.
If no other key pads are touched the Cooktop Main
POWER will turn OFF automatically.
To turn the Main Power OFF touch Main POWER key.
A beep will sound and the Power Indicator Light will
turn OFF (See Fig. 1).
(See Figure 1). Touch and hold the LOCK key pad for
3 seconds. A beep will sound and the Lock indicator
light will glow (Fig. 4). Once locked, no other displays
will glow and no Cooking Zones will activate.
To turn the Controls Lock OFF, touch and hold the
LOCK key pad for 3 seconds. A beep will sound,
the Lock indicator light will turn OFF (Fig. 3) and the
cooktop may be used normally.
located in the Main cooktop controls area. L (low
heat) should appear in the corresponding element
display (Fig. 6).
The Minute Timer feature may be useful in the kitchen
if a recipe calls for keeping track of time. This feature
will keep track of time from 1 to 99 minutes. The display
located to the left of the Timer
and key pads will
begin to count down minutes once set.
To Set the Minute Timer:
1. Set the cooktop timer to the desired time by touching
the listed over the word “timer”. Touching and
releasing the or the key pads will increase
or decrease the Minute Timer setting by 1 minute
with each key press (up to 99 minutes). You may
also hold the or key to slew the time to your
designated time.
2. Once the timer displays the desired amount of
time, release the key pads. The timer will display
the time remaining in minutes within the countdown
process. During the last 60 seconds, the timer will
countdown in seconds.
Once the Minute Timer reaches 00 a beep will
sound every 5 seconds until and key pads
are touched at the same time and the timer display
will ash “00” indicating that the time is up.
To Cancel the Minute Timer:
1. Touch the and key pads at the same time or
touch and hold either the or key pad and scroll
to 00.
2. If cancelling the Minute Timer using the scrolling
method, once the Main Control display reaches
00, release the key pad.
3. The set time will disappear from the display indicating
that the Minute Timer is no longer active.
Loading ...
Loading ...
Loading ...