Documents: Go to download!
- Owner's manual - (English)
User manual Television for Vizio M492i-B2
Table of contents
- Installing the TV
- Inspecting the Package Contents
- Installing the TV
- Installing the TV Stand
- Installing the TV on a Wall
- Controls and Connections
- Rear Panel
- Front Panel
- Remote Control Front
- Remote Control Back
- Replacing the Batteries
- Connecting Your Devices
- Connecting A Device
- Connecting a Device - Audio and Video Cable Types
- Connecting an Audio Device
- Connecting an Audio Device - Audio Cable Types
- Connecting an Audio Device - ARC
- Connecting to your Network
- Connecting to a Wired Network (Best)
- Connecting to a Wireless Network
- Completing the First-Time Setup
- Using the On-Screen Menu
- Navigating the On-Screen Menu
- Changing the Input Source
- Changing the Screen Aspect Ratio
- Viewing Video with the Menu Open
- Adjusting the Picture Settings
Installing the TV Stand
Your TV includes a stand designed to support the weight of the TV and keep it from falling over. However, the TV can still fall over if:
- It is placed on an uneven, unstable, or non-level surface
- It is pushed, pulled, or otherwise improperly moved
- If an earthquake occurs and the TV is not properly secured
To install the base:
- It is recommended that two people take part in the base installation. Remove any plastic wrapping from the TV and the stand. Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a blanket.
- Align the neck piece with the base.
- Use a Phillips screwdriver to insert and tighten the four (4) included M5 x 14mm Phillips screws into the holes on the bottom of the Base.
- Align the Stand with the back of the TV.
- When you are finished, place the TV on a stable, level surface.
Installing the TV on a Wall
To install your TV on a wall:
- Disconnect any cables connected to your TV.
- Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV.
- Remove the base by loosening and removing the screws.
- Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount.
CONNECTING A DEVICE
Your TV can be used to display output from most devices.
- Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.).
- Turn the TV and your device off.
- Connect the appropriate cable (not included) to the TV and the device.
- Turn the TV and your device on. Set the TV’s input to match the connection you used (HDMI-1, HDMI-2, etc.).
To complete the first-time setup:
- Press the Power button on the remote. The TV powers on and the Setup App starts.
- Use the Arrow buttons on the remote to highlight Home Use and press OK.
- Use the Arrow buttons on the remote to highlight your language of preference and press OK.
- Use the Arrow buttons on the remote to highlight your country, and then press the OK button.
- Use the Arrow buttons on the remote to highlight your time zone, and then press OK.
- Select the name of your wireless network from the list of available networks and press OK. Enter the network password using the keyboard on the remote, then highlight Connect and press OK.
- Use the Arrow and OK buttons on the remote to review the Terms and Conditions and Privacy Policy. When you are finished, highlight I Accept and press OK.
CHANGING THE INPUT SOURCE
External devices such as DVD players, Blu-ray Players, and video game consoles can be connected to your TV. To use one of these devices with your TV, you must first change the input source using the Input menu.
To change the input source:
- Press the INPUT button on the remote. The Input menu is displayed.
- Use the Up/Down Arrow buttons or the INPUT button on the remote to highlight the input you wish to view and press OK. The selected input is displayed.
See other models: M550VSE P50-C1 P759-G1 M370VT PQ65-F1
