Loading ...
Loading ...
Loading ...
18
www.napoleongrills.com
N415-0271-AU JAN 24.18
Geng Started
1. Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any components
packed inside. Use the parts list to ensure all necessary parts are included.
2. Do not destroy packaging unl the grill has been fully assembled and operates to your sasfacon.
3. Assemble the grill where it is to be used, lay down cardboard or a towel to protect parts from being
lost or damaged while assembling.
4. Most stainless steel parts are supplied with a protecve plasc coang that must be removed
prior to using the grill. The protecve coang has been removed from some of the parts during the
manufacturing process and may have le behind a residue that can be perceived as scratches or
blemishes. To remove the residue, vigorously wipe the stainless steel in the same direcon as the
grain.
5. Follow all instrucons in the order that they are laid out in this manual.
6. Two people are required to li the grill head onto the assembled cart.
If you have any quesons about assembly or grill operaon, or if there are damaged or missing parts
please call our Customer Soluons Department at 1-866-820-8686 between 9 AM and 5 PM
(Eastern Standard Time).
CAUTION! During unpacking and assembly we recommended you wear work gloves and safety
glasses for your protecon. Although we make every eort to make the assembly process as problem
free and safe as possible, it is characterisc of fabricated steel parts that the edges and corners might
be sharp and could cause cuts if handled incorrectly.
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
BUILT-IN UNIT OPENING DIMENSIONS
WARNING! Construcon materials and masonry dust may cause surface damage to units and accessories.
The best opon is to install components aer all construcon has been completed and the jobsite has been
thoroughly cleaned. If the components must be installed prior to the construcon being completed, then exposed
surfaces need to be covered to prevent corrosion. All surfaces must be cleaned when construcon is completed.
Do not use muriac acid to clean masonry materials from any surfaces. The lime contained in some construcon
materials is extremely corrosive. During its curing period, (1 - 2 months) it is recommended that a stainless steel
polish or wax (car wax is acceptable) be applied to prevent direct contact of the lime materials.
3/8” (10 mm)
Loading ...
Loading ...
Loading ...