Loading ...
Loading ...
Loading ...
9
A. Remove tape on fi lters. Remove fi lters from
hood and set aside.
NOTE: It is recommended to start with the
center one.
PREPARE THE HOOD (CONT’D)
2. Punch out the appropriate electrical knockout hole on top (A) or back (B) of the hood. Install the wire clamp
(included in parts bag).
HD0250
A
B
B. Remove tape on grease drip rail (1).
Lift out grease drip rail and set aside.
3. Remove the fi lters and the grease drip rail.
4. Remove the adapter/damper (1), taped inside the hood.
A
HD0172
B
HD0244
1
HD0593
1
Warranty Safety CleaningOperation Installation Service Parts
Loading ...
Loading ...
Loading ...