Loading ...
Loading ...
Loading ...
© 2016 RVM Australia Pty Ltd. All Rights Reserved
11
TO CLEAN THE STEAM HOLES
Use a cotton wool tip moistened with distilled water to remove any build-up from
that may have blocked the steam holes. Use caution not to scratch or damage the
soleplate.
NOTE: Never carry or hang the iron for storage by the power cord.
USING THE SELF-CLEAN FUNCTION
The self-clean function is useful in preventing scale build-up in your iron. Use the self-
clean function regularly, at least once a month or more frequently especially in hard
water areas.
1. Make sure the iron is not plugged in and the temperature dial is in the ‘OFF’
position.
2. Ensure the steam control switch is in ‘0’ (= No steam) position.
3. Tilt the unit to a 45 degree angle and using the water beaker, pour water into
the water inlet opening until ‘MAX’ level is reached. Do not add vinegar or other
chemicals.
4. Plug in the appliance and set the temperature dial to ‘MAX’. Wait until the
appliance heats up and temperature indicator light goes out. Return the dial back
to ‘OFF’ position.
5. Unplug the iron from mains. Hold the iron over a sink, soleplate down.
6. Press and hold the self-clean button and gently shake the iron to and fro.
7. Steam and boiling hot water will eject from the holes on the soleplate. Impurities,
scale and flakes (if any) will be flushed out.
8. Release the self-clean button as soon as all the water in the tank has been used
up (no more steam is being produced). Repeat the process as necessary.
9. Once the self-clean is done, plug the appliance back in and set the temperature
dial again to ‘MAX’ to allow the soleplate to dry.
10. Return the temperature dial back to ‘OFF’ position and unplug the iron when the
temperature indicator light goes out.
11. Move the iron over a piece of cloth, e.g., an old towel, to remove any water stains
that may have formed on the soleplate.
12. Allow the iron cool down fully before storing it.
DANGER Ejected steam is extremely hot and therefore should be avoided. Never
direct the steam towards yourself or other people as this may cause burns or scalding.
CAUTION The power plug must be removed from the outlet before the water
reservoir is filled with water.
STORING THE APPLIANCE
Complete the steps for cleaning described above. Ensure all parts are dry and
completely cooled down before storing the appliance. Store the iron vertically in a
dry, cool and clean place.
CLEANING & CARE - CONTINUED
Loading ...
Loading ...
Loading ...