Loading ...
Loading ...
Loading ...
3
If your Display is connected to a network with an
Ethernat cable, you will not see the wireless network
connection Menu. You must decide the Ethernet cable
to set a wireless network connection.
ADJUSTING THE NETWORK SETTINGS
Changing the Manual Setup Settings
Advanced users can ne-tune the network settings using the Manual
Your Display is Internet-ready, featuring both an Ethernet port and
Setup feature.
built-in high-speed Wireless-N.
To change advanced network settings:
1. From the NETWORK Menu, highlight
Back
Manual Setup
Manual Setup and press OK. The
MANUAL SETUP Menu is displayed.
DHCP Off
IP Address __.__.__.__
2. To change the settings manually,
Subnet Mask __.__.__.__
use the Arrow buttons on the
Connecting to a Wireless Network
Default Gateway __.__.__.__
remote to highlight DHCP and then
To connect to a wireless network
use the Left/Right Arrow buttons to
Pref. DNS Server __.__.__.__
whose network name (SSID) is being
change the setting to O.
Alt. DNS Server __.__.__.__
broadcast:
RJ45 MAC 0:0:0:0:0:0
3. Use the Arrow and OK buttons to
Wireless MAC 0:0:0:0:0:0
1. Press the Menu button on the
Back
adjust each setting:
remote. The on-screen Menu is
Network
• IP Address - The IP address
displayed.
Wired Connection Disconnected
assigned to the Display.
Save
2. Use the Arrow buttons on the
Wireless Access Points
• Subnet Mask - The subnet Exit 2D
Cancel
remote to highlight Network and
• Default Gateway - Your network’s
press OK. The NETWORK Menu is
default gateway address.
displayed.
• Pref. DNS Server - Your preferred domain name server
Manual Setup
3. If you do not see your wireless
address.
network displayed, highlight More
Hidden Network
Access Points and press OK. The
Test Connection
• Alt. DNS Server - Your alternate domain name server address.
WIRELESS ACCESS POINTS Menu,
4. Use the Arrow buttons on the remote to highlight Save and press
which is a list of available wireless
OK.
networks, is displayed.
5. Press the Exit button on the remote.
4. Highlight the name of your
Press OK to select your wireless access point.
wireless network (this is the
network’s SSID) and press OK.
5. Using the on-screeen keyboard,
enter your network’s password,
then highlight Connect and press
OK.
6. Press the Exit button on the
remote.
Finding MAC Addresses for Network Setup
The security settings on your router may require you to enter the
Display’s MAC address in the router’s settings.
To nd the Display’s MAC address:
1. From the NETWORK Menu, highlight Manual Setup and press OK.
The MANUAL SETUP Menu is displayed.
2. Find the MAC address for the Display at the bottom of the list. The
MAC addresses for the connections in use are displayed:
• RJ45 MAC - The Ethernet or RJ45 MAC address may be
needed to set up your network when you have connected
the Display to your network when you have connected the
Display to your network with an Ethernet (Cat 5) cable.
• Wireless MAC - The Wireless (WiFi) MAC address may be
needed to connect your Display to your network with WiFi.
21
Loading ...
Loading ...
Loading ...