Loading ...
Loading ...
Loading ...
11
3. Remove the parts for the top hinge as shown below. Lift the
refrigerator door free from the cabinet.
A. Hinge Cover Screw C. 5/16" Hex-Head Hinge Screws
B. Top Hinge Cover D. Top Hinge
4. Remove the center hinge pin and remove the hinge screws as
shown below. Lift the freezer door free from the cabinet.
A. Hinge Pin Cover C. Hinge Screws
B. Center Hinge
5. Remove the base grille by grasping the grille firmly with both
hands and pulling it toward you.
6. Remove the parts for the bottom hinge as shown below.
A. Hinge Pin Shim D. Roller Bracket
B. Bottom Hinge E. 3/8" Hex-Head Screws
C. Hinge Plate
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so could result in death or electrical shock.
FRENCH DOORS
1. Unplug refrigerator or disconnect power.
2. Keep the refrigerator doors closed until you are ready to lift
them free from the cabinet.
NOTE: Provide additional support for the refrigerator door
while the hinges are being removed. Do not depend on the
door gasket magnets to hold the door in place while you are
working
3. Starting with the right-hand side door, remove the parts for the
top hinge as shown below. Lift the refrigerator door from the
bottom hinge pin.
A. Hinge Cover Screw C. 5/16" Hex-Head Hinge Screws
B. Top Hinge Cover D. Top Hinge
4. Remove the hinge pin cover from the bottom hinge pin and
keep it for later use.
5. Before removing the left-hand side door, disconnect the wiring
plug located on top of the top hinge by wedging a flatblade
screwdriver or your fingernail between the two sections..
NOTE: The green, ground wire remains attached to the hinge.
Loading ...
Loading ...
Loading ...