Etekcity Kitchen EK7090

Product's Documents

Below are documents related to this product, you can read online or download:
EK7090 photo

User Manual

This is the main product document for model EK7090.

The file format is pdf, 16 pages, you can download this manual here .

background
1
Digital
Kitchen Scale
Model: EK7090
User Manual
Questions or Concerns?
Mon–Fri, 9:00 am–5:00 pm PST/PDT
[email protected] • (855) 686-3835
background
2
If you have any questions or concerns, please reach out to our
helpful Customer Support Team at [email protected].
We hope you enjoy your new kitchen scale!
Exclusive deals, giveaways, and product registration.
Better products for better living.
Find us here: etekcity.com
Thank you for purchasing the Digital
Kitchen Scale by Etekcity.
Become an Etekcitizen
background
3
Table of Contents
Specications
Important Safety Information
Function Diagram
Before First Use
Using Your Scale
General Operation
Unit Conversion
Automatic Power Off
Manual Power Off
Zero / Tare Function
Replacing the Batteries
Troubleshooting
Warranty Information
Customer Support
4
5
6
7
8
8
8
8
9
9
10
11
12
14
background
4
Specications
Weight Capacity 176 oz / 11 lb / 5000 g / 5000 mL
Units oz / lb:oz /  oz (water/milk) / g / mL (water/milk)
Increments 0.05 oz / 1 g / 1 mL
Auto-Off 3 minutes
Battery 3 x 1.5V AAA batteries
Dimensions 7.9 x 5.6 x 0.5 in / 200 x 141 x 12.5 mm
background
5
To avoid damage to this scale, please read and follow all instructions
and safety guidelines in this manual.
Scale
Do not exceed the 11 lb / 5000 g weight capacity as it will damage the
scale. An error indicator will appear on the LED display if the limit is
exceeded.
Do not immerse the scale in water or any liquid. If liquid is spilled on
the digital display or buttons, immediately wipe the scale clean with a
soft cloth to avoid internal damage.
Handle with care. This scale is not intended for commercial or heavy-
duty use.
Keep the scale in a cool, dry place. Avoid exposure to damp
environments or extreme temperatures.
Household use only.
Batteries
Do not mix new and old batteries.
If the low battery indicator (“Lo”) appears on the display, replace the
batteries.
If the scale is not in use for an extended period of time, remove the
batteries to conserve battery life and extend the lifetime of the scale.
Important Safety Information
SAVE THESE
INSTRUCTIONS
background
6
Function Diagram
A. LED Display
B. Unit Selection Button
C. Power/Tare Button
D. Anti-Skid Pads
E. Battery Compartment
Top
B DC EA
Bottom
background
7
Before First Use
The batteries are pre-installed in the scale.
1. Turn the scale over and open the battery compartment.
2. Remove the plastic strip from the battery compartment.
[Figure 1.1]
3. Replace the battery compartment cover.
4. Turn the scale over again and place on a hard, dry, at surface.
5. Tap to turn on the scale.
Figure 1.1
background
8
Using Your Scale
Note:
For accurate results, always place the scale on a hard, dry, flat surface,
and keep the scale away from dirt, dust, vibrations, wind, air currents, and
electromagnetic interference.
When you turn on the scale, choose units, or use the tare function, wait for
the scale to read “ ” again before measuring.
General Operation
1. Place the scale on a hard, at, level surface for measurement.
2. Tap to turn on the scale. Make sure the scale shows “ ”.
Tap to select your desired measuring unit, which will show
on the right of the display.
3. Place your item on the scale.
4. Wait for the reading on the display to stabilize.
Unit Conversion
To change the unit of measurement, tap until the display shows
the desired unit of measurement.
Automatic Power Off
To save battery power, the scale will automatically power off after 180
seconds of inactivity.
background
9
Zero / Tare Function
Whenever you measure items inside a container, you can use the tare
function to remove the container’s weight from the nal measurement.
1. Tap to turn on the scale. Make sure the scale shows “ ”.
If the screen does not display “ ” automatically, tap to
auto-adjust to zero.
2. Place the container on the center of the scale.
3. Wait for the reading on display to stabilize. The screen will display
the container’s weight.
4. Tap to tare the weight of the container. The screen should
now display “ ”.
5. Place the item in the container. The scale will measure the liquid
or items, without including the weight of the bowl. [Figure 2.1]
6. When you’re done, reset the scale by removing all weight and
tapping again.
Manual Power Off
Press and hold for 2 seconds to turn off the scale.
Figure 2.1
background
10
Replacing the Batteries
1. Turn the scale over and open the battery compartment.
2. Take out the used batteries and replace them with 3 new 1.5V
AAA batteries.
3. Replace the battery compartment cover.
background
11
Troubleshooting
Problem Possible Cause
Scale does not turn on.
Open the battery compartment cover and
remove the plastic strip.
Replace the batteries (see page 10).
Make sure batteries are inserted under
the correct polarity as marked on battery
compartment.
Reading is inaccurate.
Place scale on a level surface.
Make sure the screen displays “
before measuring (see Zero / Tare
Function, page 9).
Remove the batteries for 45 seconds, then
replace them to reset the scale.
Display shows “
Item is too heavy. Remove item from
scale to protect its weight sensors. Use a
different scale with a higher weight range.
Display shows “
Turn the scale off and on again. Avoid
moving the scale while measuring.
Display shows “
Battery power is low. Replace the batteries
(see page 10).
If your problem is not listed, please contact Customer Support
(see page 14).
background
12
Warranty Information
Terms & Policy
Etekcity Corporation warrants all products to be of the highest quality in
material, craftsmanship, and service, effective from the date of purchase
to the end of the warranty period.
Etekcity Corporation will replace any product found to be defective due
to manufacturer aws based on eligibility. Refunds are available within
the rst 30 days of purchase. Refunds are only available to the original
purchaser of the product. This warranty extends only to personal use
and does not extend to any product that has been used for commercial,
rental, or any other use in which the product is not intended for. There
are no warranties other than the warranties expressly set forth with each
product.
This warranty is non-transferrable. Etekcity Corporation is not
responsible in any way for any damages, losses, or inconveniences
caused by equipment failure or by user negligence, abuse, or use
noncompliant with the user manual or any additional safety or use
warnings included in the product packaging and manual.
Product
Digital Kitchen Scale
Model
EK7090
Default Warranty
Period
1 year
For your own reference, we strongly recommend that you record your
order ID and date of purchase.
background
13
This warranty does not apply to the following:
Damage due to abuse, accident, alteration, misuse, tampering, or
vandalism.
Improper or inadequate maintenance.
Damage in return transit.
Unsupervised use by children under 18 years of age.
Etekcity Corporation and its subsidiaries assume no liability for damage
caused by the use of the product other than for its intended use or as
instructed in the user manual. Some states do not allow this exclusion
or limitation of incidental or consequential losses so the foregoing
disclaimer may not apply to you. This warranty gives you specic legal
rights and you may also have other rights which may vary from state to
state.
ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.
Additional 1-Year Warranty
You can extend your 1-year warranty by an additional year. Log onto
www.etekcity.com/warranty to register your new product for the
extended warranty.
Please ll out all required elds and include your order ID, place of
purchase, and purchase date, if applicable.
Defective Products & Returns
If you discover your product is defective within the specied warranty
period, please contact Customer Support via [email protected] with
a copy of your invoice and order ID. DO NOT dispose of your product
before contacting us. Once our Customer Support Team has approved
your request, please return the product with a copy of the invoice and
order ID.
background
14
Customer Support
If you encounter any issues or have any questions about your new
product, please contact our helpful Customer Support Team. Your
satisfaction is our goal!
Etekcity Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
Toll-Free: (855) 686-3835
CUSTOMER SUPPORT
SUPPORT HOURS
Mon–Fri, 9:00 am–5:00 pm PST/PDT
*Please have your order invoice and order ID ready before contacting
Customer Support.
background
15
Connect with us @Etekcity
background
Building on better living.
AU0719AL_M1_0619EK7090Web

Specifications

Indexed Terms: Kitchen Scale, Digital

Etekcity EK7090 Questions and Answers

Questions and Answers

Related Products

Product Etekcity EK3550 image
Etekcity EK3550 Kitchen
2019-11-20 1 docs