Loading ...
Loading ...
Loading ...
Installation
75
Installation with wall gap
Installation with wall gap:
Before mounting the anti-tip devices,
you must use suitable screws to fas-
ten a spacer that is as thick as the re-
quired wall gap (up to 2" [51mm]) to
the wall.
Installation right against the wall:
No spacer is required. The anti-tip de-
vices are fastened directly to the wall
using the suitable screws.
Mark the centerline of the appliance
on the wall. Align the anti-tip devices
parallel to this line on the left and
right.
Then use suitable screws to fasten
the anti-tip device to the spacer/di-
rectly to the wall and to the floor.
Prepare the refrigerator for installation
as close as possible to its intended
installation location.
Release the power cord from the
back of the appliance.
Remove any cord clips from the back
of the appliance.
Connect the refrigerator to the house-
hold water supply as described in the
section on “Water connection”.
Connect the refrigerator to the power
supply as described in the section on
“Electrical connection”.
Move the refrigerator carefully to its
intended installation location.
Position the refrigerator with the back
right against the anti-tip device.
Aligning the machine
SW19/10
To align the machine, adjust the front
feet using the wrench supplied, en-
suring it is stable and level.
Loading ...
Loading ...
Loading ...