Loading ...
Loading ...
Loading ...
Operating the appliance en
17
Caution!
If the grill and oven gas burners are operating at the
same time (combined mode); When cooking with water,
the grill gas burner may go out due to the air circulation.
Notes
■ If the gas burner does not ignite within 15 seconds,
stop attempting to ignite the flame, open the oven
door and wait for 60 seconds.
■ If the flame goes out (but you have not deliberately
turned it off), turn the selector to the "Û" position and
wait for 60 seconds.
Switching on the grill
To achieve an extra gold top on certain dishes, the grill
can be switched on briefly at the end of the cooking
time when using conventional heating.
1. Open the appliance door.
2. Press and hold the selector for the grill and turn it
anti-clockwise to switch on the grill.
The grill gas burner ignites. Press and hold the
selector for a few seconds until the flame stabilises.
3. Use the selector for the grill to set the required
temperature.
4. Carefully close the appliance door.
Switching off combination mode
Turn the selector for the grill and oven to the Û position.
Rotary spit
Preparing the rotary spit
1. Slide a retaining clip onto the rotary spit and screw
on the handle.
2. Place the roast as close as possible to the centre of
the rotary spit.
3. Use retaining clips to secure the roast in place.
4. Use milled screws to secure the retaining clips.
Inserting the rotisserie spit
:Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
1. Push the rotisserie spit rack fully into the appliance
on shelf level 3.
2. Place the rotisserie spit onto the rotisserie spit rack
and unscrew the handle.
3. Push the rotisserie spit rack in fully.
4. Push the rotisserie spit rack to the right and into the
motor adaptor.
5. Pour water into a baking tray and slide it in on shelf
level 1 to collect any fat that drips out.
6. Close the appliance door.
Switching on the rotary spit
Note: When using the rotisserie spit, heat the oven
using the ( heating mode. Insert the rotisserie spit
before setting the F heating mode.
1. Turn the control knob for the oven to the F position.
2. Set the temperature.
Note: Add some water to the universal pan to catch any
fat that drips out.
Loading ...
Loading ...
Loading ...