Name: Whirlpool WTW128AF 12kg 360° Bloomwash Washer
Brand: Whirlpool
SKU: WTW128AF
Rating: 80 (1 reviews)

B L O O M W A S H

W11028051

Specifications

BLOOM WASH

PREPARATION BEFORE WASHING

WASHER MAINTENANCE

TROUBLE SHOOTING

TIPS FOR HASSLE-FREE WASH

SAFETY PRECAUTIONS

WIRING DIAGRAM

SPECIFICATIONS

B L O O M W A S H

326

Contents

SPECIFICATION

Power Supply

Type of Wash System

Wash Speed

Spin Speed

Machine Weight

Input Power

( Motor Rating )

Heater Rating

Wash / Spin Basket

Auto Restart

Soak

Lint Filter

Rat Mesh

Dimension ( WxDxH )

Water Pressure

Inbuilt Heater

Temperature Range

Machine Class

Capacity (Dry Linen)

WTW128AF

150 rpm

740 rpm

Stainless Steel

Yes

Variator

48.0 kg

770 W

1450 W

620x670x1090

35 ~ 60

Class 1

12.0 kg

All in mm

220-230V AC, 50 Hz, 13 A

0.2 - 8.0 Kgf/cm (0.02-0.8 MPa)

12.0 kg

254

Wiring Diagram

B L O O M W A S H

Wiring Diagram - 12.0 kg

G / BL

13 A

FUSE

Assembly

B L O O M W A S H

Crayons, Coffee, Ketchup, Fruit Juice, Shoe

Polish, Butter, Ink, Deodorant, Tea, Mustard

Sauce, Oil, Red Sand, Wine, Sambar, Grass,

Pickle, Dettol, Vinegar, Cough Syrup, Honey,

Soup, Mosquito Repellant Cream, Eye Brow

Pencil, Chocolates, Turmeric Powder

QUIET COMFORT *

Enjoy the comfort of washing clothes in absolute peace and silence with the

new design that reduces vibration.

ECO SPRAY *

Along with the H O Low showers, the new Eco shower brings in further

rinse improvement and water savings. It provides 15% further reduction in water

consumption in a system that already uses far less water than normal top loaders.

the cloth to be scrubbed and uses very little detergent and water.

* Available in 12.0 Kg

the

for fresh and soft

WTW128AF

524

Know your BLOOM WASH

features like:

, compared to a

This is a

BABY CARE PROGRAM

This all new program

Washing

. After which, the

speed up

the

. .

H O Low Shower

Lint Filter

12.0 kg

Lint Filter

WTW128AF

clothes

When these clothes are placed into the washing machine,

fibers the clothes.

Safety Precautions

236

Trouble Shooting / Safety Precautions

EXPRESS WASH FEATURE

quickly, c and

and -

fiber

LINT FILTER FEATURE

The Variator has radial vanes at the bottom, which repeatedly push the water up through the

Lint Filter, pouring lint free water onto the clothes. This washer comes with a unique pumping

tower, that forces water through the Filter and ensures maximum lint collection.

If muck is allowed to build up in the machine, it can result in stains on clothes or unpleasant

odor in the washing machine. Muck can occur in any washer when the fabric softener mixes

with detergent. Muck formation also depends on dirt level and quality of water used.

During every Spin cycle and at the end of draining, the machine will start spinning with water,

creating a centrifugal action, which will clean the tub off any impurities / dirt.

H LOW SHOWER FEATURE

WOOLLEN CYCLE FEATURE

This feature ensures that washable woollen clothes are well taken care of,

the

Do not install the machine in a damp area such as the bathroom, with

direct exposure to the shower. There is a danger of electric shock, fire,

machine trouble, corrosion and rusting.

The machine should not come in

Lint are the l

these

be removed

from the spinning

’

the

and

Suggestion to improve water flow rate :

a level of 2m to 80m above the level of tap and maintain a water pressure

2 2

between 0.2 kgf/cm - 8.0 kgf/cm (0.02 mPa - 0.8 mPa) and should be

more than 10ft.

Ensure that there is no blockage in water line.

For a faster flow rate, the water storage tank should correspond to

Variator.

Good wash performance depends on the right quality and quantity

of the detergent used (i.e. minimum 1g/l of water and in case of

more hardness, use 1.5g/l of water concentration) and right voltage

availability for the machine to function well. Similarly, the water

extraction also depends on right voltage level and type of

clothes used (i.e. Cotton Vs Delicate).

722

Know your BLOOM WASH/ Installation

3 pins 230V, 50Hz, 16A.

Whirlpool Corporation

woollen

use

working.

working

Hassle-

should

leakage

For more detailed information about treatment, recovery and recycling of this product, please

contact your local city office, your household waste disposal service or the shop where you

purchased the product.

PF error indicates any power failure while "Delay Wash"

feature is in use.

Ensure that the lid is closed.

218

Level the Washer

Connect the inlet hose to Machine

Connect the inlet hose to tap

are

Remove the inlet valve cap.

If Ub is displayed

and pre

into

the wash process to balance the laundry load. If off-balance

persists, the user will be alerted.

This is just for the user’s information and will not impact

the wash process.

Ensure that you have checked the above points before calling the Whirlpool Service Centre.

to prevent

manufacturing

c t.

Trouble Shooting

Installation

If display shows toggles ‘Lid Open’ with buzzer tone, close

the Lid to continue wash process.

If display shows ‘Lid Open’ without buzzer tone, the machine

is waiting for water to be filled.

Close the lid to fill water.

variator

Ensure that there is no power cut-off or the electric fuse circuit

breaker is not blown / tripped. The power cord should be properly

connected to an electrical outlet. Make sure that the lid is closed.

Check if any part of the drain hose is higher than 20cm from the

floor or if the extension drain hose is longer than 3m.

The supply voltage may be too low or too high.

The machine will resume automatically when

the voltage comes back to normal range.

920

Ensure that the free end of the drain hose is not hooked up in the

machine. If so, put it down on the floor.

Make sure that there is no blockage in the drain hose and that

it is flat on the floor.

are

This error will pop up approximately after 10 minutes, if

there is no or very low water supply.

Check if the water tap is closed / water inlet pipe filter or

inlet valve filter is blocked with foreign objects.

If yes, open the tap / clean the filter and then press the

“START / PAUSE” button again.

Always ensure that there is an adequate supply of water to

the machine.

leakage f .

B L O O M W A S H

Works up to 5.5kg of cloth load for 12.0kg model

360° Wash

Applicable for Normal, Heavy, Bedsheet and Wash Only programs through 6th

Sense - Auto water level selection. 360° Wash gives the best in class performance

using the catalytic wash principle.

The Wash gives the best in class wash performance with approximately. 10 -30%

water, 15%-40% energy and 30% time (when hot wash is selected) depending on cloth

load and model, compared to Deep Fill Wash.

360 %

360° Wash uses less water in the first phase (based on cloth load), just enough

for the clothes to get soaking wet. This 'concentrated mix' of water and detergent is

heated (if Ultra Clean option is selected manually) by the in-built heater and is

recirculated using an external pump and a specially designed shower feature, back

onto the clothes, through a waterfall effect.

This action ensures activation and best performance of detergent for soil removal.

After this cycle, additional cold water is drawn to ensure clothes are optimally

submerged in water. During this period, the wash load is subjected to 360° wash.

Recirculation pump will turn ON intermittently only in Low and Medium water level.

Catalytic Deep Fill Wash

When there is more than 5.5kg of cloth load for the 12.0kg model, the

Fill Wash principle is followed.

Catalytic Deep

Conventional Deep Fill Wash (With / Without Hot Wash selection)

This wash is done when the water level is selected manually.

This is only applicable for Low and Medium water level selection.

Water is filled in a single phase.

The fill and wash process works the same way as the 360 Wash in 3 phases.

Phase I and Phase II use less water, just enough for clothes to get soaking wet.

If the Ultra Clean option is selected, the heater will turn on or else the cold soak function

will be turned on. In Phase III, additional cold water will be used based on the wash load.

This is applicable for High and Very High water level manual selections.

Choking Hazard

Small parts.

Not for children under 3 years.

Do not forget to re-fix the filter after cleaning.

Failure to do so will result in death.

Over a period of time, impurities in the water will reduce the water inflow

to a trickle, which in turn clogs the filter.

Pull Out

Lint Filter

• Push the upper snap of the filter box

down gently and pull it to remove.

• Open the lid, clean the

lint collected inside and then

wash/flush under tap water.

• Close the lid and insert the box filter into the

corresponding slot by sliding through the

guide path in the basket. Once located, push

towards the mating slot on top to hear a click

sound (to ensure that lint filter is in position).

• Operating the washer without re-fixing the lint filter box will damage your clothes.

• It is advisable to clean the filter after every 5 washes; failing to do so may lead to

lint deposition on clothes.

Unscrew the fill hose from the machine.

IMPORTANT

Rotate the water supply hose to release it.

Water Inlet Pipe Filter

Inlet Valve Filter

1910

Preparation Before Washing /

Washer Maintenance

and

back into

original position.

If it continues to blink, .

Uniqueness of Bloom Wash / Control Panel

Use detergent dissolved in warm water to prevent detergent from clumping.

For 'Wollens' cycle, the machine, automatically fills the tub up to 'Very High' water level. This ensures that your woollen clothes are always

washed gently while ensuring best wash performance.

ULTRA CLEAN

(HOT WASH)

‘Bedsheet’

and ‘Wash only’

Ensure that the tap is open, or else, clean the fill hose filter first, and inlet valve, if required.

It indicates that the supply voltage may be too low or high.

‘Delay Wash’ allows you to set a delayed finish to wash cycle, allowing a 3 to 24 hours delay, according to your convenience.

Delay can be selected by pressing the button once for every single hour delay, as displayed on the screen.

If Low Voltage/ Low Inlet Water Temperature exists, water temperature may not reach

the set level, as the heating duration is limited to a maximum of 120 minutes, after which

the next phase of the wash process continues

1 cup = Approx. 35 g of compact detergent.

Indicates the remaining cycle time. Remaining time doesn’t include fill and drain time.

For optimizing the wash process, the remaining cycle time may be increased/decreased,

based on inlet water temperature and supply voltage.

For Model : 12.0 kg

Preparation Before Washing

Fabric Care Labels

Pre-treatment on stains or heavily soiled clothes

Helpful Tip

IMPORTANT

Sorting

Check before Loading

• Always read and follow fabric care labels and instructions to avoid damage to your garments.

• The label will show the type of fabric and how it should be washed.

• Ensure collars, cuffs, dress hem and pockets are pre-treated by brushing them

with pre-wash products.

• Treat stains as soon as possible for best results.

• Load garments in loose heaps evenly around the basket wall.

• Do not wrap large items such as sheets around the Variator.

• Load them in loose piles around the sides of the basket.

• Try mixing different size items to reduce tangling.

• Read and follow the recommendation of the pre-treating agent carefully.

• It is recommended to use the pre-treating agents away from washer, since these may cause

damage to the plastic parts of the washer.

• Washer must not be over-loaded.

Clothes must be able to move freely during

wash process for best cleaning and reduced

wrinkling and tangling.

• Sort items according to the type of the fabric, and wash separately for best results.

• Separate heavily soiled items from lightly soiled ones.

• Separate delicate items from sturdy fabrics.

• Separate lint-takers from lint-givers. Synthetics, knits, corduroy, Wollen and

black fabrics will pick up lint from towels, rugs, and chenille fabrics.

• Separate colored items from whites.

• Empty pockets. Loose coins, buttons, or any small object can pass under the

Variator and become trapped, causing unexpected sounds.

• Close zippers, fasten hooks, tie strings and sashes, and remove non-washable

trim and ornaments.

• Mend rips and tears to avoid further damage to items during washing.

• Use mesh garment bags to help avoid tangling when washing delicate or

small items.

• We do not recommend washing water-proof or water-resistant items.

WIRE

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it.

Doing so can result in death, explosion or fire.

Fire Hazard

1118

It indicates no water supply from tap or that filter is blocked with foreign objects.

to a

the

into

SOFTENER

up to a

in-built in every wash process.

Using the Special Baby Care Program /

Cycle Time

Soak, Wash is set in default mode. (Water will not be drained after

‘wash only’ cycle, this detergent water can be reused for next cycle.)

Bedsheet

Wash only

for 12.0kg capacity.

12.0kg capacity.

1712

Germ Free is set in default mode.

Germ free/Cold

Germ Free is set in default mode.

Wash

Eco

The programme used for the evaluation of (WTW128AF) under the mandatory Water Efficiency Labelling Scheme (WELS) and

the recommended Washing Programme for soiled clothes is as follows : P5-Eco

Bloom Wash 12kg - WTW128AF

Low Medium High Very High Low Medium High Very High

37 42 45 48 27 30 32 34

47 53 57 61 34 38 41 44

NA 40 44 44 NA 26 28 28

113

33 37 54 54

100

50 54 60 65 36 39 43 45

149

22 23 23 23 15 16 16 16

19 23 26 29 15 17 19 21

P7 - Woolens

NA NA

P3 - Delicate

P4 - Whites

NA NA

P5 - Eco

P10 - Rinse + Spin

P11 - Spin Only

7 NA

P12 - Wash Only

P8 - Bedding

P9 - Stain Wash

P6 - Baby Care

Program

Total time in mins (Without Express wash ) Total time in mins (With Express wash )

P1 - Daily

P2 - Heavy

Note : Cycle time is given only for manual water level selection. 6

'Auto' water level.

Excludes fill and drain time. Timings shown here are active wash cycle times.

Express wash' option is not available for P4,P6,P7, P9 and P11 programs.

To achieve the best performance, water fills up to 40% of overall volume and agitation starts, dissolving the detergent effectively to activate the enzymes.

This will be followed by Fill + agitation to enhance performance ( Applicable in High / V High water levels ). Low water wash is design intent.

Due to continuous R&D, the above timings and sequence may change without prior notice. Timings may vary from model to model and are indicative in nature.

Based on the input water temperature, voltage and water level for each program, cycle time will vary and may not match the display time.

Sense automatically calculates timing based on the wash load and will be indicated as

and