Loading ...
Loading ...
Loading ...
Note: After the sealing compound has
been used, the maximum vehicle speed
is 50 mph (80 km/h) and the maximum
driving distance is 120 miles (200
kilometers). The sealed tire should be
inspected immediately.
Note: After sealant use, the tire pressure
monitoring system sensor and valve stem
on the wheel must be replaced by an
authorized Ford dealer.
You can check the tire pressure any time
within the 120 miles (200 kilometers) by
performing the procedure from Second
stage: Checking tire pressure listed
previously.
Removal of the sealant canister from the
kit
E144623
1. Unwrap the clear tube from the
compressor housing.
E144624
2. Locate the yellow cap at the end of the
clear tube.
E144625
3. Using the yellow cap tool, press the
tab located on the kit compressor
housing while pulling up on the sealant
canister.
Installation of the sealant canister to the
kit
E144626
1. Align the sealant canister with the kit
housing.
281
MKZ (CC9)
Wheels and Tires
Loading ...
Loading ...
Loading ...