Loading ...
Loading ...
Loading ...
Operation
67
(5) Flush the cooling system to prevent it
from clogging with salt, sand, or dirt. (See
page 68 for flushing procedures.)
(6) If the watercraft will be stored for a week
or more, lubricate internal engine compo-
nents to help prevent corrosion. (See
page 69 for lubrication procedures.)
(7) Rinse the engine and engine compart-
ment with a small amount of water.
NOTICE: Do not use high-pressure
water when rinsing the engine or en-
gine compartment as severe engine
damage could result.
[ECJ00571]
(8) Wipe the engine and engine compart-
ment dry with a clean cloth (repeat step 3,
if necessary).
(9) Wipe the hull, handlebars, and jet unit dry
with a clean cloth.
(10) Spray a rust inhibitor, such as Yamaha
Silicone Protectant and Lubricant, on me-
tallic parts to minimize corrosion.
(11) Allow the engine compartment to air dry
completely before installing the seat.
EJU33452
Transporting
Before putting the watercraft on a trailer or
transporting it, be sure to put the shift lever
in the forward position (for VX Deluxe/VX
Cruiser). When transporting the watercraft
on a trailer, secure the tie downs to the trail-
er through the bow eye and stern eyes.
NOTICE: Do not attach ropes or tie
downs to any part of the watercraft other
than the bow eye and stern eyes to se-
cure the watercraft to the trailer. Other-
wise, the watercraft may be damaged.
Wrap the ropes or tie downs with towels
or rags where they touch the body of the
watercraft to avoid scratches or damage.
Do not transport the watercraft with the
shift lever in the reverse position. Other-
wise the reverse gate may hit an obsta-
cle, which could cause damage (for VX
Deluxe/VX Cruiser).
[ECJ00622]
UF2L10E0.book Page 67 Tuesday, June 3, 2008 2:16 PM
Loading ...
Loading ...
Loading ...