Loading ...
Loading ...
Loading ...
Operation
53
Check the start switch, the engine stop
switch, and the engine shut-off switch for
proper operation.
Push the start switch to start the engine. As
soon as the engine starts running, push the
engine stop switch to verify that the engine
stops immediately. Restart the engine, and
then pull the engine shut-off cord (lanyard) to
remove the clip from the engine shut-off
switch to verify that the engine stops immedi-
ately. (See pages 31 to 32 for information on
proper operation of the start switch, the en-
gine stop switch, and the engine shut-off
switch.)
EJU32680
Cooling water pilot outlet
Check that water comes out from the cooling
water pilot outlet while the engine is running
and the watercraft is in the water. (See page
32 for more information.)
EJU32711
Multifunction information center
Check the multifunction information center for
proper operation while the watercraft is in the
water. (See page 37 for information on proper
operation of the multifunction information cen-
ter.)
1 Start switch
2 Engine stop switch
3 Engine shut-off switch
4 Clip
5 Engine shut-off cord (lanyard)
UF2L10E0.book Page 53 Tuesday, June 3, 2008 2:16 PM
Loading ...
Loading ...
Loading ...