Loading ...
Loading ...
Loading ...
Review this chart to find do-it-yourself solutions for minor performance problems_ Any ser-
vice needed, other than those described in this owner's manual, should be performed by
an authorized service representative,
iF, WARNING Electrical...............................................................Shock Hazard
Disconnect electrical supply before servicing or cleaning the unit.
Failure to do so could result in electrical shock or personal injury.
ii i,ii IHII
Cleaner won't run. 1.
2.
3.
Poor job of dirt 1,
pick-up. 2.
34
4o
5o
6,
7.
8_
9,
I0.
Unplugged at wali outlet.
Tripped circuit breaker/blown fuse
at household service panel.
On!off switch not turned on
Full or clogged dust bag,
Wrong pile height setting
Worn agitator
Clogged nozzle or bag holder
Clogged hose
Hole in hose
Broken/misplaced belt
1. Plug in firmly, push on/off switch to
OR
2. Reset circuit breaker or replace fuse.,
Hose not inserted fully 8.
Motor protection system activated 9.
Dirty fitters. 10.
3. Push on/off switch to on.
1. Change bag. (page 14)
2. Adjust setting, (page 7)
3. Replace agitator, (page 21)
4. Check CLOG REMOVAL, (page 19)_
5. Check for clogs, (page 19)
6. Replace hose
7. Replace/fix belt, (page 16-18).
Insert hose fully, (page 10),
Check for clogs, (page 19)
Change filters, (page 15)
Cleaner picks up 1o Wrong pile height setting 1. Adjust setting, (page 7)
moveable rugs or
pushes too hard.
Light won't work. Burned out light bulb. Change lightbulb, (page 20)
"L
1o
2.
3,
Broken belt.,
Bare floorsetector in bare
floorsetting.
Belt installed incorrectly.
2.
3.
4.
1.
2.
1.
1.
Full or clogged dust bag.
Dirty filters.
Clogged airflow passage
1.
1o
2.
3.
Agitator does not
turn.
2.
3.
4.
1,
2,
1.
1o
Performance indicator,
some models, Is red.
Replace belt, (pages 16-I8),,
Move serector to the carpet setting,
(page 7)
Check BELT CHANGING AND
AGITATOR CLEANING,
(pages t6-18).
Change bag, (page 14)
Change filters, (page 15)_,
Ciear clog from airflow passage,
(page 19).
This is normal Light should go off
when toolts removed,
Certain attachment tools
Air flow restricted Attachment use restricts air flow, Check ATTACHMENTS, (page 8)
with attachment use,
Sound changes. New carpet fuzz clogged air path Check CLOG REMOVAL and clean
hose, (page 19),
Excessive noise as Belt rubbingon carpet/bare floor Push selector all the way forward,
vacuum Is shut off, selector shaft. (page 7)
Dirt Sensor, some Dirty optic celts_ Clean opticceils, (page !2)
models, will not work°
22
Loading ...
Loading ...
Loading ...